Products > Test Equipment
Fluke 196C Battery charger BC190/808
(1/1)
vmendes:
Hello guys,

Today I measure the voltage of charger (21.2Vcc), with load and without load. But the nominal voltage for this charger is 17.8Vcc.

The scopemeter 196C works fine with this voltage, but that’s aren’t correct.

Could I use another charger like a notebook charger ? With same voltage 17.8vcc.

Regard
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod