Author Topic: HP 410b / 410c Probes & Leads Repair / Replace  (Read 1100 times)

0 Members and 1 Guest are viewing this topic.

Offline The DoktorTopic starter

  • Regular Contributor
  • *
  • Posts: 185
  • Country: us
HP 410b / 410c Probes & Leads Repair / Replace
« on: April 04, 2022, 07:13:00 am »
I am currently repairing my HP 410b VTVM, as well as trying to provide some help to another fellow who is doing the same.

The main thing I'm interested in is the AC probe and it's cable. I purchase some Belden 9222 quite cheaply a while back planning to use that to replace the probe cable. Is that a good choice, or is it likely to have the center conductor fatigue and break in short order?  If the 9222 is not a good choice, is there a better Triax cable you can recommend? I have seen that kiss-electronics.com sell something they say is superflex Triax for the probe lead, for $35. I'd rather try to do it cheaper, but that is an option if there is nothing else recommended.

Are there any other problems with the AC probe that I should be aware of? I have had good luck with it over the years, but if it is prone to any type of problem, I would still prefer to take steps to prevent it.

 For the DC lead, what is a good, highly flexible coax to use for that?


Thanks
Ed
 

Offline kbrill

  • Contributor
  • Posts: 40
  • Country: us
Re: HP 410b / 410c Probes & Leads Repair / Replace
« Reply #1 on: April 04, 2022, 05:14:30 pm »
I have a 11036a probe ( complete ?) as well as many partial assemblies which include cable & plug . while tarnished all are new replacement parts I purchase at a large military electronics auction in bulk .

Contact me if this will be of any help .

Ken
 

Offline DrewUSN

  • Newbie
  • Posts: 1
  • Country: us
  • US Navy Vet, FC Rate, getting to electronics
Re: HP 410b / 410c Probes & Leads Repair / Replace
« Reply #2 on: November 29, 2024, 11:41:11 pm »
I have a 410B that needs an AC assembly, would you happen to have one or parts of it? I know this an old thread but I’m looking for options.

Thx,

Drew
 

Offline kbrill

  • Contributor
  • Posts: 40
  • Country: us
Re: HP 410b / 410c Probes & Leads Repair / Replace
« Reply #3 on: November 29, 2024, 11:59:38 pm »
I only have partial probe assemblies :consisting of the following :

1251-0209 telephone plug
11036-42102 boot
actual cable red
11036-42101 boot
11036-62101 tube socket and cable assembly
All components are new and pre-assembled
Hardly a complete probe but the most often required replacement parts

Cost would be minimal
 

Offline kbrill

  • Contributor
  • Posts: 40
  • Country: us
Re: HP 410b / 410c Probes & Leads Repair / Replace
« Reply #4 on: November 30, 2024, 12:02:59 am »
You probably should have contacted me directly as I am not really following that thread

 I only have partial probe assemblies :consisting of the following :

1251-0209 telephone plug
11036-42102 boot
actual cable red
11036-42101 boot
11036-62101 tube socket and cable assembly
All components are new and pre-assembled
Hardly a complete probe but the most often required replacement parts

While doubtful if this would be of any assistance  to you the cost would me minimal
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf