| Products > Test Equipment |
| Fluke 287 Connectivity |
| << < (5/6) > >> |
| Gandalf_Sr:
Thanks guys, I was worried I'd wake up today with buyers remorse but that hasn't happened; looking forward to getting the 'new' 289 :-DMM |
| Black Phoenix:
The only thing now is to get a cable and the software (if you need the software, send me a PM... ;)) The cable if you are able to snag one from eBay good, even better if you make yours. There are links above how to make one. |
| Gandalf_Sr:
--- Quote from: Black Phoenix on October 18, 2019, 09:31:55 am ---The only thing now is to get a cable and the software (if you need the software, send me a PM... ;)) The cable if you are able to snag one from eBay good, even better if you make yours. There are links above how to make one. --- End quote --- Thanks, but isn't TrendCapture the software you're referring to? I think that will come with my 'new' 289. I looked at the ir3000 but I think a home brew cable will work for now. |
| Black Phoenix:
No, TrendCapture is a function from the 287/289 Firmware. But if you want to import to the PC you will need the Fluke View Forms, that Import all the data to the PC plus the Graphics and from there you can create Reports. 287/289 TrendCapture on the DMM Fluke View Forms From the data that you log in the DMM you can then import to the Software to have better view, including a list of all the log times and their values, in a easy to watch way and from them create reports or import to excel and other programs. TrendCapture is good for On Site review of logs to decision making, Fluke View Forms for later review when you arrive at the office to fill reports, as an example of a situation. For example I used it to diagnose a equipment that were restarting by no reason, being the PSU were basically having large swells on the 12V rail. First I thought it was the PSU damage via the TrendCapture function. Then back at a quiet place downloaded the logs and analysed, and by the time stamps realize that it was another module connected to the PSU who were causing that, since the time stamps were matching the start and shutdown of that module. So I simply changed that module to a different 12V rail and it doesn't happen anymore. With that data I created a simple report and uploaded to the customer, explaining the causes and showing what was done. The software normally comes with the 287/289 if you buy the Fluke 287/289 Fluke View Forms kit, who is the DMM, probes, the USB cable, the IR3000, the magnet and the carrying bag. |
| tonycstech:
Sorry to wake you guys up but i have a question about this meter. I need to be able to display current reading to the PC monitor. Is this meter able to do that via USB adapter of some sort and a software ? I am not interested in logging or transferring any data, just want the reading displayed on the computer screen. Thanks ! |
| Navigation |
| Message Index |
| Next page |
| Previous page |