Products > Test Equipment
Fluke 289 BT1 battery cell replacement part number or equivalent
(1/1)
guswin95:
Hello all,

The super-cap issue on the Fluke 289/189 meters has been discussed enough in the site, with very helpful information. I was able to replace the super-cap in a few 189 and one 289 with replacements bought at Digi-Key.

A late addition to the repair stack is a really nice 289 newer than most of the prior repairs, and to my surprise it has a small battery cell (BT1) that someone botched somehow and shows 0VDC. The battery was superglued to the PCB and a messy solder job was present.

A Google search barely registers any mentions of these cells. For now, I removed it and am using the meter without any backup battery.

A suggested replacement battery p/n: would be appreciated to restore the meter to factory condition.

Thank you
Kean:
I'd guess it is a Seiko MS621FE-FL11E
guswin95:
Hello

It appears so. Excellent tip.
Thanks
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod