EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: jonsig on May 13, 2015, 09:22:34 pm

Title: Fluke 73-2 touch hold function
Post by: jonsig on May 13, 2015, 09:22:34 pm

Hi i got this beast .
I´m wondering if its broken because the only way for me to use the touch hold feature is to select ohms , volts_dc etc. And
hold the yellow select button in for few seconds before it finishes booting up  :scared: .
And when its in touch hold mode the only way to turn it off is to reset the meter , turn it to off position .

(http://i77.photobucket.com/albums/j47/nonni2000/11109261_10153205458728213_1721584058591480177_n_zpsce0bpc3x.jpg) (http://s77.photobucket.com/user/nonni2000/media/11109261_10153205458728213_1721584058591480177_n_zpsce0bpc3x.jpg.html)

Title: Re: Fluke 73-2 touch hold function
Post by: retiredcaps on May 13, 2015, 10:01:05 pm

Working as per manual.

Title: Re: Fluke 73-2 touch hold function
Post by: jonsig on May 14, 2015, 01:24:18 am

Thank you , i have only found service manuals so far .

Title: Re: Fluke 73-2 touch hold function
Post by: retiredcaps on May 14, 2015, 03:49:43 am

An user manual is here.

https://www.cs.washington.edu/1999/lab/facilities/hwlab/docs/mans/77______umeng0200.pdf (https://www.cs.washington.edu/1999/lab/facilities/hwlab/docs/mans/77______umeng0200.pdf)