Products > Test Equipment
Fluke 789
Ultrasniper:
Anyone has Fluke 789 Service Manual? Thanks
Arhigos:
https://dam-assets.fluke.com/s3fs-public/789_____cmeng0200.pdf
Ultrasniper:
Thank you very much, but i looking for a service manual, i hope inside this manual I will find the 789 IR port CPL commands. Thanks again
Arhigos:
here is link for remote interface commands and communication specifications (789 and 189 using same protocol)
https://drive.google.com/file/d/0BxD05xrbn-k6dnpZcmhTZ2hMREU/edit
Ultrasniper:
Thank you very much Arhigos. The 789 is a test device half multimeter and half loop calibrator. Then, the half multimeter part respond in the same way to the 189 commands, but the loop calibration part has is own commands ( I believe) and not so popular than multimeters commands. If one of you has an idea in which document may the information explicit, I’ll appreciate the data indeed thanks a lot. Regards.
Navigation
[0] Message Index
[#] Next page
Go to full version