Products > Test Equipment
Fluke 867B, good or obsolete?
harrimansat:
Try this, is a HP printer emulator
kripton2035:
here is a battery upgrade to li-ion for a fluke 97. the supplies of the 97 and 867 are really close to each other. may be I will try it.
rvalente:
--- Quote from: glicos on May 25, 2016, 09:59:34 pm ---For me it help me a lot and been using it as my main meter for 9 years till know, esp the component test function. Only drawback is the battery (but now i upgrade it to lithium that i bought from aliexpress) and maybe due to old age, the LCD started to fade but when viewed directly in front its normal. I already bought a new LCD and just waiting for it to arrived. The "oscilloscope" function is not that much of use...only for quick visual indicator.
Overall, its a good meter for me..
--- End quote ---
The LCD "glass" itself is probably fine, this generation of polarizers usually go bad, often is just a matter of getting the film in sheets, cut and replace. I saved my THS720 from this curse, there is topic here
harrimansat:
Serial commands for 867
COMMAND NAME COMMAND PAGE
-------------------------------------------------------
DEFAULT SETUP DS 9
IDENTIFICATION ID 10
PROGRAM COMMUNICATION PC 11
PROGRAM CONFIGURATION PM 13
PROGRAM WAVEFORM PW 15
QUERY DATA QD 17
QUERY MEASUREMENT QM 18
QUERY PRINT QP 20
QUERY WAVEFORM QW 22
RESET INSTRUMENT RI 23
SET FUNCTION SF 25
harrimansat:
Battery charger has a 16 hours timer to prevent battery toast. The problem is that timer is reset every time that adaptor is connected.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version