Fluke 87V screen goes crazy with WIFI & Cell phone signals

[Kiriakos-GR]

Simon You are almost correct , about the 3G frequency .

Under this page of specs about my phone , http://www.gsmarena.com/sony_ericsson_k600-1043.php  .
( This phone had an street price of 400 EUR as Free device , I payed 180EUR as new subscriber at the Vodafone network , and now I am currently at the Wind provider )   

Its listed as  
2G Network     GSM 900 / 1800 / 1900
3G Network     UMTS 2100  

This page shows the The supported frequency bands in Greece
http://www.gsmarena.com/network-bands.php3?sCountry=GREECE

This page shows the The supported frequency bands in Australia
http://www.gsmarena.com/network-bands.php3?sCountry=AUSTRALIA

[Pinky]

Fluke 289, Amprobe 38XR, Extech EX530

Is there any special reason why you performed the tests on all DMMs switched to DC mV range and not to AC mV range as it should be done? 

[Kiriakos-GR]

There is no specific range Issue ,  its the inner CPU of the multimeter that gets effected..   

[Simon]

Simon You are almost correct , about the 3G frequency .


( This phone had an street price of 400 EUR as Free device , I payed 180EUR as new subscriber at the Vodafone network , and now I am currently at the Wind provider )   

Its listed as  
2G Network     GSM 900 / 1800 / 1900
3G Network     UMTS 2100  

your using Wind ? good luck, we used them in Italy and they were crap. at one time we got a letter telling us we might loose the service because their roaming contract with TIM (Italy's version of mobile BT) was going to run out and they had not renewed it. luckily they were able to renew it.

[Kiriakos-GR]

your using Wind ? good luck, we used them in Italy and they were crap.

Same story here , they have poor signal coverage in my area , that drains my battery faster than when I was in vodafone.
Currently I am originaly on an network called as Q-card  that was with vodafone, and now it merged with Wind ..  yea " Good luck "   
 

[Kiriakos-GR]

At this point I like to connect the threads .. 

Adding too the Video response of Dave ..   



And the link of the last thread related to it ...

https://www.eevblog.com/forum/index.php?topic=1307.0

If you need to post something follow the above link.