EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: br4n_d0n on April 30, 2023, 08:46:24 pm

Title: Fluke 8840a fuse holder #516039
Post by: br4n_d0n on April 30, 2023, 08:46:24 pm

Anyone have one of these fuse holders they can take measurements of so I can 3D print it?

I'm also willing to purchase one for a reasonable price.

Title: Re: Fluke 8840a fuse holder #516039
Post by: lowimpedance on May 01, 2023, 02:43:46 am

Quote from: br4n_d0n on April 30, 2023, 08:46:24 pm

Anyone have one of these fuse holders they can take measurements of so I can 3D print it?

I'm also willing to purchase one for a reasonable price.

Attached are the measurements on my 8840a fuse holder.
All measurements in mm, some I'm sure you could round up/down some of them no issue.
Actual pictures are on line (found one ebay seller selling various parts with a picture of one, out of stock of course!)
You will have to find a way to incorporate a suitable banana socket with a cup at the rear to take the appropriate fuse.
The locking lugs are part of the moulding  and have a dovetail shape .

If you do make a 3D model can you add it to the thread,

https://www.eevblog.com/forum/testgear/replacement-knobs-feet-and-fittings-for-test-equipment/ (https://www.eevblog.com/forum/testgear/replacement-knobs-feet-and-fittings-for-test-equipment/)

Title: Re: Fluke 8840a fuse holder #516039
Post by: br4n_d0n on May 01, 2023, 04:16:55 am

Thank you for sharing this and if I do end up making a functional part, I'll definitely share it.  :-+