EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: jonkers on December 07, 2019, 06:58:27 am
-
Hello all. Using a fluke 125b scopemeter and i have exported the data from flukeview2 to a .csv file.
When I open it up there is 3 main column's of data. The first is the sample time and the next 2 in this case are current.
It looks like the B column is where the minimum is from and the C column looks as though that is where the Max and Average comes from.
Just wondering if anybody could explain a little more.
EG.
0.00 16.90 17.00
2.00 16.90 17.00
4.00 16.60 17.00
6.00 17.00 17.20
8.00 17.20 17.30
10.00 17.20 17.30
12.00 17.10 17.30
14.00 17.10 17.20
16.00 17.10 17.10
18.00 17.10 17.20
20.00 17.20 17.40