| Products > Test Equipment |
| FNIRSI-1013D AS MUCH USE AS A CHOCOLATE FIREGUARD. |
| << < (3/18) > >> |
| pcprogrammer:
All you needs is a command terminal and access to the file to transfer to the SD card. If all is well the linux you have running from the USB stick has internet connection, so you can go to the repository and download the file on to the USB stick. Then open the command window with "ctrl - t" or "ctrl - alt - t". At the command line you can then type the commands, but make sure you select the right target. So first connect the SD card reader/writer with the SD card inserted into the computer. This will mount the SD card automatically if all is well. At the command prompt type "lsblk" and then enter. This will list the block devices. --- Code: ---NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 3,7T 0 disk └─sda1 8:1 0 3,7T 0 part /home/peter/Data sdb 8:16 0 111,8G 0 disk ├─sdb1 8:17 0 55,9G 0 part └─sdb2 8:18 0 55,9G 0 part / --- End code --- It will show something like the above. The SD card might show up as sdc ..... 1G 0 disk and the line below will show ---sdc1 .... 1G part ....... This gives you the name of the device you need to work with. Maybe it is best to save a screen shot of the listing and post it here. (You can use the PrtScrn button to make the capture and then post it here) We can then take it step by step, just to keep your system safe. But it is about my bed time, and tomorrow I'm a bit busy, so be patient :) |
| Gannet:
Thanks Peter, as they say Rome wasn't built in a day. Have a good weekend. George |
| pcprogrammer:
I tried my scope with a bench power supply and at 5V on the battery terminals it draws ~1A. Yours has a different FPGA, but 350mA is quite a bit extra, so you might want to check the different voltages in the scope and feel if parts get extra warm. |
| Gannet:
Hi Peter, I feel like I moved mountains. Hopefully my copy of my screenshot is attached. Nothing inside the scope is getting unduly warm. No how do i get that file onto my usb drive sdc/sdec1 Cheers George |
| Gannet:
Welcome to Linux Lite 6.2 linux Sunday 20 November 2022, 13:47:29 Memory Usage: 1063/15913MB (6.68%) Disk Usage: 483/7GB (7%) Support - https://www.linuxliteos.com/forums/ (Right click, Open Link) linux ~ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 1.9G 1 loop /rofs sda 8:0 0 931.5G 0 disk └─sda1 8:1 0 931.5G 0 part sdb 8:16 1 0B 0 disk sdc 8:32 1 3.7G 0 disk └─sdc1 8:33 1 3.7G 0 part /cdrom nvme0n1 259:0 0 465.8G 0 disk ├─nvme0n1p1 259:1 0 100M 0 part ├─nvme0n1p2 259:2 0 16M 0 part ├─nvme0n1p3 259:3 0 465.1G 0 part └─nvme0n1p4 259:4 0 593M 0 part linux ~ Hmmm, that's better :-) |
| Navigation |
| Message Index |
| Next page |
| Previous page |