| Products > Test Equipment |
| FNIRSI-1013D AS MUCH USE AS A CHOCOLATE FIREGUARD. |
| << < (10/18) > >> |
| pcprogrammer:
Hi George, yep, that is my firmware, and this also shows that your display is different. The colors are supposed to be yellow and magenta cyan for the traces and green for the trigger level indicator. The background is supposed to be black. :o This probably means that the firmware in the flash is not different then the one in mine. It might be that the display connection is poor, or has it always been like this? The v0.005 is the revision indicator, and that is indeed the latest version that I made. It does lack the FFT that the original has, and there is no roll mode with the large time per division settings. Does the fact that you now have my version of the firmware running, mean you skipped the step of making the backup of the flash? In other words that you did not load the fnirsi_1023d_fwb.bin file? Hope you enjoy having the scope running again. Cheers, Peter Edit: had the wrong color in mind. |
| pcprogrammer:
Here is a picture of what the startup screen looks like on mine. It is a bit blurry because I broke the glass when I changed the touch panel and replaced it with an acrylic sheet. The protection foil is still on it. |
| Gannet:
I think you're correct Peter, my colors are a wee bit washed. I missed out the 1023d.bin thinking if my firmware in the flash was scuppered then there was no need to worry and just go ahead and load your firmware Unless of course I can still do it and that you may want a copy? I'll check my display connections just in case, but for now it's working thanks to you and your tenacity in sticking with me. Have a great weekend. Kind regards George PS. Mr moderator, Peter deserves a goody sticker on this board. |
| pcprogrammer:
Hi George, since it is most likely the same old firmware, now that it seems your display is a bit of, I don't need a copy of it. The display shows the inverse of the intended colors and I'm not sure if this is an option that can be selected. Have to dig up the datasheet for it. But at least your scope seems to be working again. Just report back when new problems arise. Regards, Peter Edit: did not see a mode where a display would do this, so it is a bit weird. But for example the yellow is made of 255 red, 255 green and 0 blue, and it shows as blue on yours, so 0 red, 0 green and 255 blue. |
| Gannet:
Thanks Peter if you hear of any more on the Color’s, please let me know, George |
| Navigation |
| Message Index |
| Next page |
| Previous page |