EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: hafrse on September 02, 2020, 10:42:13 am

Title: FSIQ / FSEM Rohde&Schwarz:Can not display analyzer display on external monitor
Post by: hafrse on September 02, 2020, 10:42:13 am
Hello,

When connecting external monitor using the PC monitor output, the system boots to WIN NT correctly but when it has loaded all the components and tries to display the analyzer display in the end of the startup process, is says :
"An external Monitor has not been connected or configured..." (pleaase see picture)

I tried to choose different settings, etc... same problem, any clues what could it be wrong?

My system is running under BIOS 3.3, win NT , firmware 4.40.3

Many thanks in advance!
Title: Re: FSIQ / FSEM Rohde&Schwarz:Can not display analyzer display on external monitor
Post by: Bernd on March 02, 2021, 10:40:24 am
Hello hafrse,

Press: SETUP / GENERAL SETUP / MONITOR CONECTED

Then it will work.
Regards, Bernd