Products > Test Equipment
FSP30/40 embedded windows xp for spectrum analyzer.
DavidAlfa:
So instead of trying the easy, simple way, copying the SYSTEM file from the restore point folder to system32, you reinstalled the whole thing :-//
Did you made backup or not?
Luckly most people don't scrap the car for a flat tire.
coromonadalix:
@DavidAlfa Dont too critical, the OP may or may not have experiece, but he's getting somewhere now
@g7kbr67 if you have the system folder backup and or the iso file of your equipment and extracted the same folder
With windows devices manager on each error you can do an automatic or manual search for the drivers, DO A MANUAL search and point where you have stored the repertory / files
It should be able to see and install the needed files BUT sometimes you need all the files and subdirectories of the system folder to be at the same place / in the same folder for all the *.cat, *.dll's, *.inf, *.sys files etc ...
Xp can do a search for drivers but can be stupid at times ....
In the system properties wich version of XP do you have, is it SP1 SP2 ??? you have a package update of XP SP3 available to download
https://www.majorgeeks.com/files/details/microsoft_windows_xp_service_pack_3.html
Install it and reboot before going further, it resolve a few things and upgrade some component BUT an XP SP2 windows is usually fine with equipment IF you do not let it go on the internet, if it has an network port on it
Since XP is outdated and not secure in anyways for web stuff but useful in a closed network
g7kbr67:
Hi
I have the following on the flash drive, I have not cleared that down. All I have done is install a SATA drive and build windows xp and that all. I have the following on the flash drive see from screenshot.
I can copy the flash card both C and D onto a DVD for safe keeping.
Regards
Paul
g7kbr67:
Hi
Can you confirm the location of the restore folder?
Regards
Paul
g7kbr67:
Hi coromonadalix
I have installed on the SATA drive windows pro and the SP2.
In the hardware profile, the only issues I can see are the motherboard drivers for interfaces, but will this cause issues with the FSP40.
The other thing I notice people are advising is to recover the restore point system to the system 32 folder, not sure the location of the retore point.
Regards
Paul
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version