Products > Test Equipment
FSP30/40 embedded windows xp for spectrum analyzer.
<< < (6/16) > >>
g7kbr67:
Hi

Is this the process to see the backup/retore point for windows xp?

Launch
Windows Explorer and go to Tools | Folder Options and click the View tab.
Select
the Show Hidden Files And Folders option button,
clear the Hide Protected Operating System Files check box, and click the Yes
button in the Warning dialog box. (If the system is in a workgroup, you’ll
need to clear the Use Simple File Sharing check box as well.) Click OK to
close the Folder Options dialog box.
Access
the root directory of the hard disk, right click on the System Volume
Information folder, select Properties and access the Security tab.
Click
the Add button, enter your user account name in the Select Users,
Computers, or Groups dialog box and click OK twice.
Now you can now access the System Volume Information folder
and view the files.

In order to ensure the security of the Restore Point files, you
should remove your user account from the System Volume Information folder once
you’ve finished your investigation.

Note: These steps
only apply to Windows XP Professional using NTFS.
g7kbr67:
Hi DavidAlfa

I now have visible the system volume information folder, but via my windows 10 machine I can access the folder.  See screenshot attached.

Regards

Paul
coromonadalix:
well i think you're not understanding a few things  ... you're going too far for nothing

Do you have the instrument original files, a hard drive backup of your instrument before a complete installation  or iso  and or  backup files of your instrument, not from your personal computer


EDIT    im downloading your file from ko4bb.com   ill check  a few things
g7kbr67:
Hi

Ok well , so I have a XP built on a SATA drive on the FSP40.  All I have is the original flash drive which was inside the unit.  This holds the following files: it (screenshot attached) has two drive letters.

Think like you said going down the route of an install on XP.

I need to know what I have on the old flash drive, can I install the R&S SA user interface.

I don't know what needs to be installed on the fresh XP drive?

Regards

Paul
coromonadalix:
im still downloading

see this :
https://www.drivereasy.com/knowledge/how-to-manually-install-a-driver-in-windows-xp/


do a search on your  old sd card ....  it may take a while,  it should normally find them,  and you do this for each  unknown device error you have

well the K4obb  website 1.2 gig iso  is a hell to navigate  it was not properly done / created multi parts  ..... 

and the RS webiste files are a pain, they still assume you work with floppies ??


download from this link  :   https://www.sendspace.com/file/a1mbnu

Extract it,  in the  "FSP_450_SP5_GlorisZip"   folder you will see  "Disk 1"  folder, i have merged in it all the other cab files,  put this on an usb key  and start the setup.exe   it should go fine

for the "Extensions" folder,  "k40"  folder i did the same  as an example ....
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod