Products > Test Equipment
FSP30/40 embedded windows xp for spectrum analyzer.
g7kbr67:
Hi
Is this the process to see the backup/retore point for windows xp?
Launch
Windows Explorer and go to Tools | Folder Options and click the View tab.
Select
the Show Hidden Files And Folders option button,
clear the Hide Protected Operating System Files check box, and click the Yes
button in the Warning dialog box. (If the system is in a workgroup, you’ll
need to clear the Use Simple File Sharing check box as well.) Click OK to
close the Folder Options dialog box.
Access
the root directory of the hard disk, right click on the System Volume
Information folder, select Properties and access the Security tab.
Click
the Add button, enter your user account name in the Select Users,
Computers, or Groups dialog box and click OK twice.
Now you can now access the System Volume Information folder
and view the files.
In order to ensure the security of the Restore Point files, you
should remove your user account from the System Volume Information folder once
you’ve finished your investigation.
Note: These steps
only apply to Windows XP Professional using NTFS.
g7kbr67:
Hi DavidAlfa
I now have visible the system volume information folder, but via my windows 10 machine I can access the folder. See screenshot attached.
Regards
Paul
coromonadalix:
well i think you're not understanding a few things ... you're going too far for nothing
Do you have the instrument original files, a hard drive backup of your instrument before a complete installation or iso and or backup files of your instrument, not from your personal computer
EDIT im downloading your file from ko4bb.com ill check a few things
g7kbr67:
Hi
Ok well , so I have a XP built on a SATA drive on the FSP40. All I have is the original flash drive which was inside the unit. This holds the following files: it (screenshot attached) has two drive letters.
Think like you said going down the route of an install on XP.
I need to know what I have on the old flash drive, can I install the R&S SA user interface.
I don't know what needs to be installed on the fresh XP drive?
Regards
Paul
coromonadalix:
im still downloading
see this :
https://www.drivereasy.com/knowledge/how-to-manually-install-a-driver-in-windows-xp/
do a search on your old sd card .... it may take a while, it should normally find them, and you do this for each unknown device error you have
well the K4obb website 1.2 gig iso is a hell to navigate it was not properly done / created multi parts .....
and the RS webiste files are a pain, they still assume you work with floppies ??
download from this link : https://www.sendspace.com/file/a1mbnu
Extract it, in the "FSP_450_SP5_GlorisZip" folder you will see "Disk 1" folder, i have merged in it all the other cab files, put this on an usb key and start the setup.exe it should go fine
for the "Extensions" folder, "k40" folder i did the same as an example ....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version