Products > Test Equipment

FSP30/40 embedded windows xp for spectrum analyzer.

<< < (8/16) > >>

g7kbr67:
Hi coromonadalix

Ok I really thank you for your help, but with please talk me through what I do with the three files, firmware, new folder and system 32.  Are these files for me to try and repair the old flash drive or for the new windows xp build?

I just need to understand what I need to do for the rebuild and I am sure I can sort this, i hope.

Thanks for your understanding.

Regards

Paul

g7kbr67:
Hi JeremyC

Thanks for the information.

Just need some guidance what I need to do to install the spectrum analyser back on the fresh install that is windows xp.

Regards

Paul

alm:

--- Quote from: g7kbr67 on November 27, 2022, 05:57:27 am ---I just need to understand what I need to do for the rebuild and I am sure I can sort this, i hope.

--- End quote ---


--- Quote from: coromonadalix on November 27, 2022, 02:46:29 am ---This is the system32 files of the 1.2 gig iso link of ealier threads, extract them on a usb key and make windows search manually for them

--- End quote ---
To rephrase coromonadalix's advice: Extract the system32 folder from that archive (ignore the other folders for now), and for each of the unknown devices in Device Manager, select search for driver, select manually search and select the system32 folder as the folder to search. If you need even more detailed step-by-step instructions, maybe it would help to have someone more experienced in setting up Windows XP to help? This has very little to do with the spectrum analyzer and is just setting up Windows XP with obscure drivers.

It should at least install drivers for some of the unknown devices, if not all of them.

g7kbr67:
Hi ALM

The Windows XP is at SP3 and the only hardware driver issues are shown in attached photo.

Thernet Controller
PCI Device
PCI Simple communication
Video controller
Video controller (VGA Compatible)

If I do a manual hardware drivers search and select the system32 folder, I don't get any updated drivers for these individual items.

I take it these are all relating to the motherboard inside the FSP40.

I am still not 100% sure where I get the actual software for the FSP40 spectrum analyser?  I know I can get firmware from the R & S website but is that only firmware.

Regards



Paul

nctnico:

--- Quote from: alm on November 27, 2022, 10:43:34 am ---
--- Quote from: g7kbr67 on November 27, 2022, 05:57:27 am ---I just need to understand what I need to do for the rebuild and I am sure I can sort this, i hope.

--- End quote ---


--- Quote from: coromonadalix on November 27, 2022, 02:46:29 am ---This is the system32 files of the 1.2 gig iso link of ealier threads, extract them on a usb key and make windows search manually for them

--- End quote ---
To rephrase coromonadalix's advice: Extract the system32 folder from that archive (ignore the other folders for now), and for each of the unknown devices in Device Manager, select search for driver, select manually search and select the system32 folder as the folder to search. If you need even more detailed step-by-step instructions, maybe it would help to have someone more experienced in setting up Windows XP to help? This has very little to do with the spectrum analyzer and is just setting up Windows XP with obscure drivers.

It should at least install drivers for some of the unknown devices, if not all of them.

--- End quote ---
There still is a possibility that the drivers are in a different directory. I'd take the entire image and search for all *.inf files in it. Maybe there is something that stands out like file in a Rohde & Schwarz or FSPxyz (xyz is whatever text) directory. And it is not uncommon for test equipment firmware to also include Windows drivers so the drivers may be installed in a directory when the application software is installed.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod