| Products > Test Equipment |
| FSP30/40 embedded windows xp for spectrum analyzer. |
| << < (9/16) > >> |
| g7kbr67:
Hi NCTNICO Did do a search for the INF files and tried installing from the system32 folder. But these are the motherboard drivers not the the actual R & S hardware modules. It's so annoying I can't repair this 40GHz unit, knowing that all the mdules inside are ok, it's the corrupt operating system on the original flash card . Flash card has part no of 1303.0417.08 Labelled: Flash Disk for R & S FSP with windows XP. Regards Paul P |
| alm:
--- Quote from: g7kbr67 on November 27, 2022, 11:39:11 am ---Thernet Controller PCI Device PCI Simple communication Video controller Video controller (VGA Compatible) --- End quote --- My guess is that the unknown PCI device and PCI simple communication controller might be the devices that communicate with the RF hardware. Do the PCI device IDs resolve to anything common or to an unknown device with vendor R&S? There are PCI ID databases available online. --- Quote from: g7kbr67 on November 27, 2022, 11:39:11 am ---I am still not 100% sure where I get the actual software for the FSP40 spectrum analyser? I know I can get firmware from the R & S website but is that only firmware. --- End quote --- If R&S doesn't make it available, then either from the downloads you already found or from the original drive. That's why I listed the availability of the custom drivers at the very beginning as a pre-requisite to make a Windows XP install do anything useful. Otherwise you just have a very big outdated desktop PC. After the drivers, the next challenge will be the the software. --- Quote from: g7kbr67 on November 27, 2022, 12:20:37 pm ---Did do a search for the INF files and tried installing from the system32 folder. But these are the motherboard drivers not the the actual R & S hardware modules. --- End quote --- Did you also search the original drive for .inf files? The installed drivers will likely be part of a file like OEM9.inf. which contains many other drivers. Let the driver installer worry about finding the driver within the .inf files. |
| Qw3rtzuiop:
Did you try that xp image yet? http://www.ko4bb.com/getsimple/index.php?id=download&file=Rohde_Schwarz/Rohde_Schwarz_FSP/A_complete_image_of_the_instruments_hard_drive.iso.zip |
| g7kbr67:
Hi no, I haven't as yet, I don't have enough details of what FSP it is from it says NT4, the FSP40 had XPE Regards Paul |
| g7kbr67:
What's the best way to install this iso onto a blank disk drive on the FSP40? Regards Paul |
| Navigation |
| Message Index |
| Next page |
| Previous page |