| Products > Test Equipment |
| FSP30/40 embedded windows xp for spectrum analyzer. |
| << < (15/16) > >> |
| coromonadalix:
Be sure to keep all the softwares i have sent you in the links from send space, they will dissapear in a few days The last driver took me many many hours of search to find them, and they come from an old HP System ?? Have you tried all the software from R & S ?? The "firmwares files" https://www.rohde-schwarz.com/firmware/fsp40/ And the last one " the service pack 1.20" ----------------------------------------------------------------------------------------------------------------------------------------------- Explications With a special software i extracted the hard drive image " FUJITSU_MHT2030AT_Media " registry, Windows 11 would not let me load the Hive .. And i see what the old windows does start REGEDIT4 [HKEY_LOCAL_MACHINE\TempKeyRR0\Microsoft\Windows\CurrentVersion\Run] "StartupScreen"="C:\\winnt\\system32\\StartupScreen.exe" "ShutdownTool"="shutdown.exe" "DowngradeAgent"="C:\\Program Files\\Rohde&Schwarz\\DowngradeAgent\\DowngradeAgent.exe" In the old windows\system32\ there is 5 startup files StartupScreen.exe StartupScreen_ESCI.exe StartupScreen_ESPI.exe StartupScreen_FSP.exe StartupScreen_FSQ.exe StartupScreen_FSU.exe A shutdown Tool In the old windows\system32\ shutdown.exe ----------------- And finally i think all the R&S software(s) installation "DowngradeAgent"="C:\\Program Files\\Rohde&Schwarz\\DowngradeAgent\\DowngradeAgent.exe" |
| g7kbr67:
Hi Coromonadalix As yet I haven't moved forward on the R & S firmware files. I will try this over the weekend, hopefully I will be popping the Champaign on Sat. Regards Paul |
| coromonadalix:
If this new installation is on a SD-Card, in a last resort if the R&S softwares doesn't work You may need to revert back to an old windows 2000 iso image to get something working ??? I helped you resolve every aspect of the Computer side of the Instrument But the R&S Software(s) is another thing .... And this time i may not be able to help |
| g7kbr67:
Hi coromonadalix I am curious to know, has as far as you know any members on the group rebuilt the drive and got the R & S software working. It would be good to know. What equipment have you got running after a rebuild, what's your test equipment setup? Regards Paul |
| shashitej:
Hi, Iam facing the same problem, windows working fine, but R&S drivers when copied and loaded ,a blackscreen is displayed instead of R&S FSP window for a couple of seconds and then reverts back to winxp Any help with this issue will be highly appreciated regards SHASHI |
| Navigation |
| Message Index |
| Next page |
| Previous page |