Products > Test Equipment

FSP30/40 embedded windows xp for spectrum analyzer.

<< < (15/15)

coromonadalix:
Be sure to keep all the softwares i have sent you in the links from send space,  they will dissapear in a few days

The last driver took me many many hours of search to find them,   and they come from an old HP System ??



Have you tried all the software from R & S ??   The "firmwares files"

https://www.rohde-schwarz.com/firmware/fsp40/

And the last one " the service pack 1.20"

-----------------------------------------------------------------------------------------------------------------------------------------------
Explications

With a special software i extracted the  hard drive image " FUJITSU_MHT2030AT_Media "   registry,  Windows 11  would not let me load the Hive ..

And i see  what the old windows does start

REGEDIT4
[HKEY_LOCAL_MACHINE\TempKeyRR0\Microsoft\Windows\CurrentVersion\Run]
"StartupScreen"="C:\\winnt\\system32\\StartupScreen.exe"
"ShutdownTool"="shutdown.exe"
"DowngradeAgent"="C:\\Program Files\\Rohde&Schwarz\\DowngradeAgent\\DowngradeAgent.exe"

In the old windows\system32\
there is 5 startup files

StartupScreen.exe
StartupScreen_ESCI.exe
StartupScreen_ESPI.exe
StartupScreen_FSP.exe
StartupScreen_FSQ.exe
StartupScreen_FSU.exe

A shutdown Tool
In the old windows\system32\

shutdown.exe

-----------------

And finally i think all the R&S  software(s)  installation

"DowngradeAgent"="C:\\Program Files\\Rohde&Schwarz\\DowngradeAgent\\DowngradeAgent.exe"

g7kbr67:
Hi Coromonadalix

As yet I haven't moved forward on the R & S firmware files.  I will try this over the weekend, hopefully I will be popping the Champaign on Sat.

Regards

Paul

coromonadalix:
If this new installation is on a SD-Card,    in a last resort  if the R&S softwares doesn't work

You may need to revert back to an old windows 2000 iso image  to get something working ???

I helped you resolve every aspect of the Computer side of the Instrument 

But the R&S  Software(s) is another thing ....   

And this time i may not be able to help

g7kbr67:
Hi coromonadalix

I am curious to know, has as far as you know any members on the group rebuilt the drive and got the R & S software working.

It would be good to know.

What equipment have you got running after a rebuild, what's your test equipment setup?

Regards

Paul

Navigation

[0] Message Index

[*] Previous page