Products > Test Equipment
FSP30/40 embedded windows xp for spectrum analyzer.
(1/16) > >>
g7kbr67:
Hi All

My last Plea for help, I have posted a couple of emails about the issue.  The Windows could not start because the following file is missing or corrupt \WINNT\SYSTEM32\CONFIG\SYSTEM.   I took the top off and I have a Compact Flash drive with the following information on it. Part No. 1303.0417.07, Flash Disk for R&S FSP with Windows XP.

I don't have a Windows build embedded XP disk, or the analyzers build software and R&S have told me they can't help.  If only I had a friend who works in their repair\service department.

Could I just install a standard Windows XP build and install the firmware which I believe is still on the R&S website?  https://www.rohde-schwarz.com/firmware/fsp40/

I would need to know on the old drive as I can still read the drive if I put it in a caddy, where the calibration data is for it.

Otherwise, the unit is a dustbin job.

Any help would be much apricated.

Regards


Paul P
Qw3rtzuiop:
Hi,
i dont have a solution but two links that maybe help you.
There is an FSP xp image on KO4BB http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Rohde_Schwarz/Rohde_Schwarz_FSP
The other one is the a link to archive.org where someone uploaded the xp embedded installer disks https://archive.org/details/XPESP2
g7kbr67:
I did find the files in http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Rohde_Schwarz/Rohde_Schwarz_FSP

Not sure if they are both the same, one is an ISO and the other is a TIB file.

The embedded XP link, not sure how this complies?  I see there is a A, B, C file,

Any help would be much appricated.
 

alm:
Windows XP embedded is not just something you install from CD. It's made to be customized by an OEM and then a custom build with all the drivers and software included is deployed to the device. So your hope is either finding the original XPe build by R&S or see if the software works with regular Windows XP and if you can find the drivers.
g7kbr67:
Hi ALM

So, do you know if the link http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Rohde_Schwarz/Rohde_Schwarz_FSP well the http://www.ko4bb.com/getsimple/index.php?id=download&file=Rohde_Schwarz/Rohde_Schwarz_FSP/Rohde_Schwarz_FSP_Spectrum_Analyzer_Disk_Image_NT4_2.80SP3.zip  is a TIB file, which is a different image build.  Looks like I might need to buy the complier software.

Thanks for your info on the windows XP, looks like this might be imposable to fix.

Regards

Paul
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod