| Products > Test Equipment |
| Fujitsu Denso EUL-75JL electronic load calibration |
| (1/2) > >> |
| ARF:
I bought an old (2001) electronic load EUL-75JL. At first glance everything is fine, but the current meter has an error of about 100mA. The current meter shows 100mA in "HI" mode without load and 0.0357A in "Low" mode. The instrument has a calibration function and I am sure it can be corrected. I could not find user manual or service manual. The calibration menu has 31 items and without instructions it is impossible to understand what each particular item is responsible for. There are no variable resistors inside, completely digital design. Do you guys have any ideas? |
| ARF:
Is there no solutions? |
| _Wim_:
If you search for http://www.access.fujitsu.com/ with the internet archive, you can find the original sites where this where sold. Together with automatic translation in your browser you might be able to find a manual. https://web.archive.org/web/20160417234435/http://www.access.fujitsu.com/ |
| Madmanguruman:
Better late than never. Adding this in case someone stumbles across this thread. |
| DavidKo:
I have tried to obtain the manual for EUL-150XL and it seems also as unobtanium. Fujitsu says Denso, Denso says they have nothing to do with it. By the search of internet archive (no pdf found) it seems that it was in Fukushima and the business was closed. I was able to find one name from internet archive in some other Fujitsu site and there was said that they no more support these products (they do another business). |
| Navigation |
| Message Index |
| Next page |