Products > Test Equipment
GW instek GPP-4323 no load display off
Veketti:
Dear All,
Could someone who has these GW Instek DC power supplies check whether nothing connected to the terminals it shows load? Mine shows on every channel >1mA, whether this is normal? It is brand new power supply and second already as the previous one had faulty channel 1...
Thank you in advance.
Hexley:
The readback accuracy for current is specified as +/- (0.3% of reading + 10 mA). So an error of +1.2 mA is well within spec.
Pity that Instek does not publish the calibration method so owners could adjust things.
FWIW, my unit has ~ 1mA indicated at no load on all channels except one -- Channel 4 indicates exactly 0 mA with no load. Luck of the draw.
Hydron:
It is actually possible to calibrate it using some undocumented SCPI commands, it's a bit of a pain though and really needs to be done with an automated setup (there are many calibration points). I never found time to write the script to do so (not my strong suit) and my lab is packed away right now so can't help much sorry, but it can be done - I played around enough to confirm that.
mawyatt:
--- Quote from: Hexley on September 24, 2023, 07:51:01 pm ---
Pity that Instek does not publish the calibration method so owners could adjust things.
FWIW, my unit has ~ 1mA indicated at no load on all channels except one -- Channel 4 indicates exactly 0 mA with no load. Luck of the draw.
--- End quote ---
Ours behaves similar.
Agree GW needs to make the self Cal available to users without the need to dredge thru a bunch of SCPI programmed routines/scripts.
Best,
Hexley:
--- Quote from: Hydron on September 25, 2023, 03:21:41 pm ---It is actually possible to calibrate it using some undocumented SCPI commands, it's a bit of a pain though and really needs to be done with an automated setup (there are many calibration points). I never found time to write the script to do so (not my strong suit) and my lab is packed away right now so can't help much sorry, but it can be done - I played around enough to confirm that.
--- End quote ---
That's pretty tantalizing, Hydron.
Do you remember off the top of your head how you went about discovering the undocumented SCPI commands? That might give a head start to anyone who wanted to re-discover the trail you blazed...
Navigation
[0] Message Index
[#] Next page
Go to full version