Author Topic: Hacked DS1054z and firmware updates?  (Read 6261 times)

0 Members and 1 Guest are viewing this topic.

Offline Fleetz

  • Regular Contributor
  • *
  • Posts: 60
  • Country: au
Hacked DS1054z and firmware updates?
« on: August 07, 2018, 01:36:59 am »
If a DS1054Z has had the 100MHz hack applied and Rigol subsequently issue a firmware update on the unit are you able apply that offical Rigol update without any issue?
 

Online xrunner

  • Super Contributor
  • ***
  • Posts: 4523
  • Country: us
  • hp>Agilent>Keysight>?
Re: Hacked DS1054z and firmware updates?
« Reply #1 on: August 07, 2018, 02:09:02 am »
Yes.
I am a Test Equipment Addict (TEA) - by virtue of this forum signature, I have now faced my addiction
 
The following users thanked this post: Fleetz

Offline Luckysin

  • Newbie
  • Posts: 2
  • Country: us
Re: Hacked DS1054z and firmware updates?
« Reply #2 on: September 12, 2018, 09:41:38 pm »
 

Offline MarkF

  • Super Contributor
  • ***
  • Posts: 1523
  • Country: us
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 8207
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Hacked DS1054z and firmware updates?
« Reply #4 on: September 13, 2018, 01:14:31 am »
Remember to warm up the scope and run the self-calibration after a firmware update (whether or not you've unlocked features).
I TEA.
 

Offline Fungus

  • Super Contributor
  • ***
  • Posts: 10408
  • Country: 00
Re: Hacked DS1054z and firmware updates?
« Reply #5 on: September 13, 2018, 09:23:09 am »
If a DS1054Z has had the 100MHz hack applied and Rigol subsequently issue a firmware update on the unit are you able apply that offical Rigol update without any issue?

Yes.
« Last Edit: October 23, 2018, 02:26:56 pm by Fungus »
 

Offline Fleetz

  • Regular Contributor
  • *
  • Posts: 60
  • Country: au
Re: Hacked DS1054z and firmware updates?
« Reply #6 on: October 23, 2018, 02:12:32 pm »
I completed the upgrade today using member janekivi modified 00:04:04:03:05 firmware which correct the pluses to pulses text error on the display. Thank you janekivi....

I upgraded from 00:04:02:SP3 which I believe was the firmware it shipped with back in 2014, I think 6 revision on. Many improvements and enhancements. It blows me away what this scope can do for the money.

Yes the scope ran for a good 30 minutes before hitting “self cal”, probably took just over 20 minutes to complete. All works a treat.

Thanks for all your support to my questions...


« Last Edit: October 23, 2018, 07:30:13 pm by Fleetz »
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 8207
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Hacked DS1054z and firmware updates?
« Reply #7 on: October 24, 2018, 03:47:27 am »
Thanks for the follow up report, Fleetz. Enjoy your scope!
I TEA.
 
The following users thanked this post: Fleetz

Offline LektroiD

  • Regular Contributor
  • *
  • Posts: 235
  • Country: gb
  • If it didn't explode, I'm happy.
    • Music here
Re: Hacked DS1054z and firmware updates?
« Reply #8 on: April 16, 2019, 04:50:18 pm »
New firmware: v00.04.04.04.02
 

Offline asbo

  • Newbie
  • Posts: 1
  • Country: us
Re: Hacked DS1054z and firmware updates?
« Reply #9 on: June 21, 2019, 08:15:23 pm »
Release notes aren't updated v00.04.04.04.02   :(

Anyone happen to know what the update is supposed to address?
 

Offline Fungus

  • Super Contributor
  • ***
  • Posts: 10408
  • Country: 00
Re: Hacked DS1054z and firmware updates?
« Reply #10 on: June 21, 2019, 08:33:17 pm »
Release notes aren't updated v00.04.04.04.02   :(

Yes they are. Look inside the zip file.

Anyone happen to know what the update is supposed to address?

I do.  :popcorn:
 

Offline MarkF

  • Super Contributor
  • ***
  • Posts: 1523
  • Country: us
Re: Hacked DS1054z and firmware updates?
« Reply #11 on: June 21, 2019, 09:27:08 pm »
New firmware 00.04.04.04.03 (2019-06-21):
https://www.rigol.com/File/ProductSoftWare/20190621/DS1000Z(ARM)update.rar


I will probably wait till it hits the North America site to download.

Looks like it is related to this thread:
https://www.eevblog.com/forum/testgear/help-rigol-ds1054z-waveform-corruption-in-stop-mode/
« Last Edit: June 21, 2019, 09:41:47 pm by MarkF »
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1032
  • Country: pt
Re: Hacked DS1054z and firmware updates?
« Reply #12 on: June 21, 2019, 09:56:19 pm »
[History]
-------------
v00.04.04.04.03  2018/05/30
     - Fixed the wave error when STOP and changing Timebase


BTW, they should launch a correction just to the release notes date!!
 
The following users thanked this post: Trader

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 8207
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Hacked DS1054z and firmware updates?
« Reply #13 on: June 21, 2019, 09:57:30 pm »
Attention to detail. Recurring theme. :horse: :-DD

But, I appreciate that they're still fixing new things that get reported.
I TEA.
 
The following users thanked this post: Jacon

Offline tick

  • Newbie
  • Posts: 2
Re: Hacked DS1054z and firmware updates?
« Reply #14 on: July 20, 2019, 04:40:34 pm »
I just downloaded from North America site and last two release dates are fixed:

Quote
[History]
-------------
v00.04.04.04.03  2019/05/30
     - Fixed the wave error when STOP and changing Timebase

v00.04.04.04.02  2019/02/26
     - Add new encoder drivers

 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 8207
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Hacked DS1054z and firmware updates?
« Reply #15 on: July 20, 2019, 06:38:47 pm »
Next version: 04.04.04.04  ^-^
I TEA.
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1032
  • Country: pt
Re: Hacked DS1054z and firmware updates?
« Reply #16 on: July 20, 2019, 08:27:53 pm »
Next version: 04.04.04.04  ^-^

2018/08/01  :-DD
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 8207
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Hacked DS1054z and firmware updates?
« Reply #17 on: July 20, 2019, 08:57:16 pm »
 :-DD
I TEA.
 

Offline Trader

  • Contributor
  • Posts: 11
  • Country: us
Re: Hacked DS1054z and firmware updates?
« Reply #18 on: January 15, 2020, 07:51:24 pm »
About the last firmware version "00.04.04.04.03" (https://www.rigolna.com/firmware/).

After this update, is the Rigol DS1054Z still hackable?

Any change to some future firmware update fixes the "hackability"?

Thank you all.
« Last Edit: January 15, 2020, 07:53:15 pm by Trader »
 

Offline Fungus

  • Super Contributor
  • ***
  • Posts: 10408
  • Country: 00
Re: Hacked DS1054z and firmware updates?
« Reply #19 on: January 15, 2020, 08:13:38 pm »
There's no ongoing battle between hackers and Rigol.

Rigol is not trying to "fix" the hackability.
 

Offline qiran

  • Newbie
  • Posts: 3
  • Country: cn
Re: Hacked DS1054z and firmware updates?
« Reply #20 on: February 02, 2020, 01:07:13 pm »
I bought DS1054Z from a Rigol agent. And DS1054Z has been hacked by the agent before they shipped it to me. I think Rigol would not fix the "hackable" bug. Only personal users will hack their scope becasue personal users are very sensible for the price.
 

Offline bitwelder

  • Frequent Contributor
  • **
  • Posts: 834
  • Country: fi
Re: Hacked DS1054z and firmware updates?
« Reply #21 on: February 02, 2020, 02:21:38 pm »
I bought DS1054Z from a Rigol agent.
Where? In China? And from some official agent/reseller?
 

Offline Gandalf_Sr

  • Super Contributor
  • ***
  • Posts: 1121
  • Country: us
Re: Hacked DS1054z and firmware updates?
« Reply #22 on: February 02, 2020, 02:52:19 pm »
I bought DS1054Z from a Rigol agent. And DS1054Z has been hacked by the agent before they shipped it to me. I think Rigol would not fix the "hackable" bug. Only personal users will hack their scope becasue personal users are very sensible for the price.
How was it hacked? What did they do to it?

As far as the Rigol DS1054Z goes, the only 'hacks' I know of involve generating the codes that Rigol would have sent you if you had paid for them.
I'd like to make the world a better place but they won't give me the source code
 

Offline ebastler

  • Super Contributor
  • ***
  • Posts: 3323
  • Country: de
Re: Hacked DS1054z and firmware updates?
« Reply #23 on: February 02, 2020, 03:02:41 pm »
I bought DS1054Z from a Rigol agent. And DS1054Z has been hacked by the agent before they shipped it to me. I think Rigol would not fix the "hackable" bug. Only personal users will hack their scope becasue personal users are very sensible for the price.

All features (serial decoding, advanced triggers, large memory) have been officially factory-enabled on all DS1054Z shipped during the past year or two. Only the 100 MHz "upgrade" is not officially available.

Did your DS1054Z have the higher bandwidth enabled, or just the other features?
 

Offline klausES

  • Regular Contributor
  • *
  • Posts: 62
  • Country: de
  • Collecting, restoring Sony ES and Esprit devices.
Re: Hacked DS1054z and firmware updates?
« Reply #24 on: February 02, 2020, 05:15:20 pm »
From my DS1054Z that I bought in December 2019 (from a larger official dealer for measurement technology here in the country)
all options were enabled, but of course not the 100 MHz.

All other options are officially preinstalled or activated on the dealer's website.
Since the original box was not opened, I can only assume that Rigol had already delivered it to this dealer "so".

Since Rigol also sells a DS1104Z and this is more expensive, I cannot imagine that this option can ever be made legal by a dealer.
« Last Edit: February 02, 2020, 05:17:49 pm by klausES »
"Art is when you can't do it ... because if you can, it's not art"
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf