Products > Test Equipment
Hacking the DSO2X1X
Aldo22:
--- Quote from: Sami on June 23, 2024, 11:42:16 pm ---Your "Conversion" file worked like magic. :D
--- End quote ---
It's not mine, it's from DavidAlfa.
The entire FAQ is here: https://www.eevblog.com/forum/testgear/hantek-dso2x1x-models-master-thread/
I had already pointed out the patch to you above: after applying the patch "2D15 conversion"
You must have missed that.
--- Quote from: Sami on June 23, 2024, 11:42:16 pm ---Where are you in Switzerland, if I may ask? I'm in Basel.
--- End quote ---
Central Switzerland
johnka:
I'm thinking to buy the 2C10 which is much cheaper than 2D15.
Is there any way to know if it has the required components soldered before buying it?
I live in Greece and it's impossible to find these components locally.
DavidAlfa:
No, but it's very likely to include them.
Couldn't you get them from AliExpress anyways?
johnka:
I used a discount coupon on aliexpress and I got the 2D10 (almost same price with 2C10 - €153) to make sure it will have the required components for the generator.
Should I follow the same instructions to convert to 2D15 like it was a xxCxx model?
Should I update to the latest version? It came with SW 1.0.3.0.0 230327.00 and FW 3205.
I have a question about the probe. On x10 attenuation it mentions max input voltage<600V DC+Peak AC. Does it mean 1200 Vpp or 600 Vpp? 230V(rms) is 650Vpp. Can I probe that?
BlownUpCapacitor:
Read DavidAlfa's FAQ found in this signature
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version