Author Topic: Old Philips Fluke 97 / 96B (maybe others?)  (Read 53024 times)

0 Members and 1 Guest are viewing this topic.

Offline harrimansat

  • Regular Contributor
  • *
  • Posts: 157
Re: Old Philips Fluke 97 / 96B (maybe others?)
« Reply #175 on: March 28, 2021, 06:43:41 pm »
 Fluke 9x calibration adjust and verification procedures attached.
 
The following users thanked this post: lyonsk

Offline chrisc1122

  • Newbie
  • Posts: 1
  • Country: us
Re: Old Philips Fluke 97 / 96B (maybe others?)
« Reply #176 on: March 30, 2021, 12:30:50 am »
This is a fascinating thread, lots of info.  However, lots of info regarding firmware that I would expect to be garnered from an actual service manual for the newer 92B, 96B, 99B and 105B scopes.

Does anyone have an actual service manual and or schematics for these scopes ?  If so, can you please share, as I have had no success finding one, and would greatly appreciate a copy, as using the 97 service manual has proved problematic on the digital side for all happening on this thread.  Making any real mods or repairs other than replacing visually compromised parts is proving difficult.  More than willing to pay for any expenses to make that happen.

Thanks

Chris
 
The following users thanked this post: chukin

Offline harrimansat

  • Regular Contributor
  • *
  • Posts: 157
Re: Old Philips Fluke 97 / 96B (maybe others?)
« Reply #177 on: April 12, 2021, 08:31:52 am »
Old scopemeter serial link updating at 38400 rate with LV:



 

Offline chukin

  • Newbie
  • Posts: 3
  • Country: ch
Re: Old Philips Fluke 97 / 96B (maybe others?)
« Reply #178 on: April 13, 2021, 09:20:24 am »
Hi all

As the owner of a dead Fluke 96B I can only confirm Chris' comments and add my voice to his plea for anyone with a service manual to please make it available one way or another. Trying to repair using the 93/95/97 service manual - which is tantalizingly similar, but not quite enough be sure of the detail - is extremely frustrating.

Thanks in advance for any help

Peter
 

Offline harrimansat

  • Regular Contributor
  • *
  • Posts: 157
Re: Old Philips Fluke 97 / 96B (maybe others?)
« Reply #179 on: May 01, 2021, 07:15:33 pm »
I´m trying to make a remote control, someone knows how is the QS answer encoded?

I attach a video, the first part is in scope mode pressing the move key, and the second in meter mode not key pressed.





« Last Edit: May 01, 2021, 07:54:53 pm by harrimansat »
 

Online smaultre

  • Regular Contributor
  • *
  • Posts: 69
  • Country: ru
Re: Old Philips Fluke 97 / 96B (maybe others?)
« Reply #180 on: May 02, 2021, 05:39:19 pm »
I also interested, how to get the serial number by terminal? Who knows any information?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf