Spectrum Analyzer - Rigol DSA815

[RikV]

So I must say too. Thanks!

[Nilton C]

Re: Spectrum Analyzer - Rigol DSA815
« Reply #1188 on: August 21, 2023, 08:36:29 pm »
Say ThanksReplyQuote
So, let's follow PeDre's discoveries to DELETE LICENSES ON A RIGOL DSA8xx/7xx:

1. Create a USB vendor disk (instructions attached) and insert the disk in the Rigol DSA (should work in any model)

2. Activate FACTORY MODE, using the keys according to the attached sequence.

3. A Del Option will appear to allow the deletion of the licenses. WARNING: Once pressed, it will delete all licenses! (You'll need to re-insert the ones you want to retain.)

This procedure was investigated by @PeDre. It seems that currently there is no SCPI command implementation to delete the licenses.
* DSA_USB_VendorDisk.txt (0.33 kB - downloaded 49 times.)

* DSA815-Production-Mode.png (13.77 kB, 800x480 - viewed 144 times.)

* DSA815-Del-Option.png (14.89 kB, 800x480 - viewed 138 times.)


Hi, I tried to do the same procedure but I couldn't do it.
make a pendriver to access factory mode
Would you help me
When trying to enter factory mode, the command is blocked
I use fw .18 or dsa and new model

[Holkly]

Can you obtain this information?

*IDN?
:PRIVate:FACTory:SKEY?

If so, pm me and I may be able to help you. 

You've got PM, Thanks !