Products > Test Equipment
Hantek 2000 series - 2C42/2C72/2D42/2D72
tunk:
There may be some missing parts inside, among them a DAC:
https://translate.google.com/translate?hl=en&sl=ru&u=https://www.nickbel.com/2019/01/28/hantek-2c42-2d42-2c72-2d72-hack.html&prev=search
aRGee:
Thanks for the answer, yes i soldered all suggested components (also a dac902) on the pcb, double checked everything. I see activity on the databus of the DAC, I see no clock signal on pin28 of the DAC....
Microcheap:
Have you soldered the R65 resistor (5.11k) too?
aRGee:
yes, I soldered them all, here is my heavely fluxed proof:)
aRGee:
Hi everybody, it works finally. I ordered a new DAC from the wellknown seller. Now he's 50 cents more expensive:) I received one with a much better print then the old one. I changed the DAC on the PCB, changed R65 to 560 ohm and burned the firmware from the circuitspecialist (found in this threat). Everything works fine now, the meter behaves like a 2d72. Everybody thanx for the replies. Regards, Robert
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version