Products > Test Equipment

Hantek 6022BE 20MHz USB DSO

<< < (206/241) > >>

isquicha:

--- Quote from: Hernexto on September 15, 2017, 12:20:45 am ---Isquicha, some places say they are similar only by outside.
Will be impossible to make it to work.

And pulseview (sigrok) doesn't want to detect my 6022BE... :(

I have so many drivers lying around... :-0

--- End quote ---

 :'( :'( :'(

vphuoc:

--- Quote from: Techoisseur on September 11, 2016, 09:50:37 pm ---Hi RacSantos,
Welcome to this Hantek 6022BE Users group.

My apologies, there is a typographical error in the link shown in my Reply #937 on this topic.
The correct link for the Open6022BE C/C++ Source Code for CodeGear Rad Studio is:
http://jmp.sh/sJKpC23

These links were first posted by the original contributors on this topic, as described below:

Open6022BE Pre Release version PR18 binary executable for Windows:
http://jmp.sh/k0tTgXg
Posted by RichardK on 2 April 2014 in Reply #540 at:
https://www.eevblog.com/forum/testgear/hantek-6022be-20mhz-usb-dso/msg418102/#msg418102

Open6022BE Pre Release version PR19 C/C++ Source Code & executable binary for CodeGear C++Builder (Rad Studio):
http://jmp.sh/sJKpC23
Posted by RichardK on 12 December 2014 in Reply #733 at:
https://www.eevblog.com/forum/testgear/hantek-6022be-20mhz-usb-dso/msg566881/#msg566881

Unofficial User Manual for Hantek 6022BE using Open6022BE software:
http://jmp.sh/3RFfHFz
Posted by Matchless on 22 December 2014 in Reply #747 at:
https://www.eevblog.com/forum/testgear/hantek-6022be-20mhz-usb-dso/msg572503/#msg572503

I can confirm that Open6022BE version PR19, with minor changes, successfully compiles under Idera / Embarcadero (formerly CodeGear) RAD Studio XE5.
Some minor changes changes were made to eliminate compiler warnings and errors.
It was first necessary to install ToolBar 2000 by Jordan Russell (manually patched for use with later versions of RAD Studio).
I have also been able to extend the code to allow generation of a CSV file for all selected channels, to allow convenient import of captured data into other software, e.g. MS Excel.

I regret that I have no knowledge of using this software on the MAC OS X, but suggest that you read carefully through all the messages on this topic to gather the information, as contributors have been accessing the Hantek 6022BE SDK from various other platforms.

Good luck  :-+

--- End quote ---

Hi Techoisseur

I'm successfully install toolbar 2k but I get stuck in RAD studio 10.2 (version 25).

Checking project dependencies...
Compiling Hantek_6022BE.cbproj (Debug, Win32)
bcc32 command line for "Hantek_6022BE.cpp"
  c:\program files (x86)\embarcadero\studio\19.0\bin\bcc32.exe -D_DEBUG -nDebug -I"C:\Users\Phan Van Phuoc\Downloads\tb2k-2.2.2\Lib\D12";"c:\program
  files (x86)\embarcadero\studio\19.0\include\windows\vcl";6022BE;\boost\tr1\tr1;"c:\program files (x86)\embarcadero\studio\19.0\include";"c:\program
  files (x86)\embarcadero\studio\19.0\include\vcl";"c:\program files (x86)\embarcadero\studio\19.0\include";"c:\program files
  (x86)\embarcadero\studio\19.0\include\dinkumware";"c:\program files (x86)\embarcadero\studio\19.0\include\windows\crtl";"c:\program files
  (x86)\embarcadero\studio\19.0\include\windows\sdk";"c:\program files (x86)\embarcadero\studio\19.0\include\windows\rtl";"c:\program files
  (x86)\embarcadero\studio\19.0\include\windows\vcl";"c:\program files (x86)\embarcadero\studio\19.0\include\windows\fmx";
  C:\Users\Public\Documents\Embarcadero\Studio\19.0\hpp\Win32;C:\Users\Public\Documents\Embarcadero\Studio\19.0\hpp\Win32 -y -k -r- -c -tM -tW -C8
  -oDebug\Hantek_6022BE.obj -w-par -Od -v -vi -H=Debug\Hantek_6022BE.pch -H Hantek_6022BE.cpp
[bcc32 Warning] W8123 Path '\boost\tr1\tr1' not found - path ignored in option '-I'
[bcc32 Warning] W8123 Path 'c:\program files (x86)\embarcadero\studio\19.0\include\vcl' not found - path ignored in option '-I'
[bcc32 Warning] W8123 Path '\boost\tr1\tr1' not found - path ignored in option '-I'
[bcc32 Warning] W8123 Path 'c:\program files (x86)\embarcadero\studio\19.0\include\vcl' not found - path ignored in option '-I'
bcc32 command line for "MainForm_Dlg.cpp"
  c:\program files (x86)\embarcadero\studio\19.0\bin\bcc32.exe -D_DEBUG -nDebug -I"C:\Users\Phan Van Phuoc\Downloads\tb2k-2.2.2\Lib\D12";"c:\program
  files (x86)\embarcadero\studio\19.0\include\windows\vcl";6022BE;\boost\tr1\tr1;"c:\program files (x86)\embarcadero\studio\19.0\include";"c:\program
  files (x86)\embarcadero\studio\19.0\include\vcl";"c:\program files (x86)\embarcadero\studio\19.0\include";"c:\program files
  (x86)\embarcadero\studio\19.0\include\dinkumware";"c:\program files (x86)\embarcadero\studio\19.0\include\windows\crtl";"c:\program files
  (x86)\embarcadero\studio\19.0\include\windows\sdk";"c:\program files (x86)\embarcadero\studio\19.0\include\windows\rtl";"c:\program files
  (x86)\embarcadero\studio\19.0\include\windows\vcl";"c:\program files (x86)\embarcadero\studio\19.0\include\windows\fmx";
  C:\Users\Public\Documents\Embarcadero\Studio\19.0\hpp\Win32;C:\Users\Public\Documents\Embarcadero\Studio\19.0\hpp\Win32 -y -k -r- -c -tM -tW -C8
  -oDebug\MainForm_Dlg.obj -w-par -Od -v -vi -H=Debug\Hantek_6022BE.pch -H MainForm_Dlg.cpp
[bcc32 Warning] W8123 Path '\boost\tr1\tr1' not found - path ignored in option '-I'
[bcc32 Warning] W8123 Path 'c:\program files (x86)\embarcadero\studio\19.0\include\vcl' not found - path ignored in option '-I'
[bcc32 Warning] W8123 Path '\boost\tr1\tr1' not found - path ignored in option '-I'
[bcc32 Warning] W8123 Path 'c:\program files (x86)\embarcadero\studio\19.0\include\vcl' not found - path ignored in option '-I'
[bcc32 Warning] Hantek.h(54): W8008 Condition is always false
[bcc32 Warning] Hantek.h(62): W8008 Condition is always false
[bcc32 Warning] Hantek.h(70): W8008 Condition is always false
[bcc32 Error] Constants.h(11): E2238 Multiple declaration for 'HDC'
[bcc32 Error] windef.h(81): E2344 Earlier declaration of 'HDC'
[bcc32 Warning] MainForm_Dlg.cpp(1030): W8111 Accessing deprecated entity '_fastcall TThread::Resume()'
[bcc32 Warning] MainForm_Dlg.cpp(1031): W8111 Accessing deprecated entity '_fastcall TThread::Resume()'
[bcc32 Error] MainForm_Dlg.cpp(2717): E2357 Reference initialized with 'TPoint', needs lvalue of type 'TPoint'
[bcc32 Error] MainForm_Dlg.cpp(2717): E2342 Type mismatch in parameter 'p' (wanted 'TPoint &', got 'TPoint')
[bcc32 Error] MainForm_Dlg.cpp(2775): E2357 Reference initialized with 'TPoint', needs lvalue of type 'TPoint'
[bcc32 Error] MainForm_Dlg.cpp(2775): E2342 Type mismatch in parameter 'p' (wanted 'TPoint &', got 'TPoint')
[bcc32 Error] MainForm_Dlg.cpp(3539): E2357 Reference initialized with 'TPoint', needs lvalue of type 'TPoint'
[bcc32 Error] MainForm_Dlg.cpp(3539): E2342 Type mismatch in parameter 'p' (wanted 'TPoint &', got 'TPoint')
[bcc32 Error] MainForm_Dlg.cpp(3905): E2064 Cannot initialize 'const std::string &' with 'wchar_t *'
[bcc32 Error] MainForm_Dlg.cpp(3905): E2342 Type mismatch in parameter 'Filename' (wanted 'const std::string &', got 'wchar_t *')
[bcc32 Error] MainForm_Dlg.cpp(3930): E2064 Cannot initialize 'const std::string &' with 'wchar_t *'
[bcc32 Error] MainForm_Dlg.cpp(3930): E2342 Type mismatch in parameter 'Filename' (wanted 'const std::string &', got 'wchar_t *')
Failed
Elapsed time: 00:00:07.6

I'm very appreciate if you can share your code or share to me how to make it compile.

Thanks

vphuoc:

--- Quote from: Fabio1963 on January 05, 2017, 11:03:13 am ---Hi
I've added the Lissajous figure to PCSCOPE (version 1.7)
See attached figure
Fabio

--- End quote ---

Hi

I love your PCScope. Can you share your latest version?

Thanks

Default:
Here is a simple WinUSB driver for the 6022BE/6022BL to support Sigrok/PulseView on Windows.

PulseView Windows installer:
http://sigrok.org/jenkins/job/sigrok-cross-mingw/buildtype=static,debugtype=release,platform=cross-i686-w64-mingw32/lastSuccessfulBuild/artifact/pulseview-NIGHTLY-32bit-static-release-installer.exe

user5:
Can someone tell me what is the capacity of the fat capacitor near the voltage regulator (see attachement)? I was unaware about the absence of galvanic isolation when tested my power supply. Now there is a short cicuit.
Also, is it possible to analyze power lines with this type of oscope? May be separate power line can help?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod