Products > Test Equipment

Hantek 6022BE 20MHz USB DSO

<< < (211/241) > >>

daybyter:
Do you have a stable trigger with OpenHantek under linux? That is my main problem yet. But I have to admit, that my version might be a bit dated.

Wlodek74:
Dear Friends,
I got Hantek 6022BE.
Recently, on this forum I learned that there is alternative software. At least 2 worth to consider: Open6022 V. PR18 or PR19 and second OpenHantek from openhantek.org.
Did anyone compared this softwares and can tell me which one is performing better? I am using oscilloscope in audio constructions applications so for me the most important is range 0Hz to 1,4112 MHz (I2S protocol freq for 44,1 sampling rate).
PS - don't tell me H6022BE is a toy - I know this very well, but I paid 41 eur inc shipment, brand new :)  Less than lunch for family in fair restaurant:):)

b_force:

--- Quote from: Wlodek74 on April 06, 2018, 08:17:41 am ---PS - don't tell me H6022BE is a toy - I know this very well, but I paid 41 eur inc shipment, brand new :)  Less than lunch for family in fair restaurant:):)

--- End quote ---
If there is a decent use for something, it's not a toy.
It's maybe not a Festool, but hey. Sometimes a b-brand is more than good enough for the job!

soubitos:

--- Quote from: roderick on December 29, 2016, 02:31:24 am ---
--- Quote from: Fabio1963 on December 26, 2016, 07:47:14 pm ---Goog morning
I bought an Hantek 6022BE and I've played with its SDK.
I developed a little oscilloscope using VB.NET. If anyone is interested this is the dropbox link: https://www.dropbox.com/sh/qieod71ucovd6we/AADJvoBmMZNcR0kFB8ysS7vSa?dl=0
Any suggestion is welcome
Fabio

--- End quote ---
Yes!  Very interested in yours.  Just downloaded your installer.

--- End quote ---
For some reason, this worked just right from the first time and although not an "oscilloscope" it measures much better than stock software and others i tried with my brand new hantek

It just seems to measure some 0.03-0.05V over my DMM which is not much you might say but it is when i want to measure output ripples etc and i get say 0.188 instead of 0.158V (or more)
Photo is with probes shorted.

electrosci:
hi guys, very intresting and usefull forum, compliments ;)

i need to measure the outer foil of caps, and i have bought hantek 60022BE oscilloscope, but i can't able to measure any difference reversing the cap, otherwise my friend that use non cheap oscilloscope doesn't have these problems.

could you help me ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod