Products > Test Equipment
Hantek 6022BE 20MHz USB DSO
Cliff Matthews:
Hi Horo, Is it correct to say each 6022Bx has a unique Gui ID? and therefore OpenHantek users need to build their own QtCreator driver?
(my device manager shows a Base Container ID as {3bf70575-a951-11e9-b229-fcaa1433a5e4} )
I ask this because the OpenHantek driver provided in another post would not install (error scrn. provided), so my previous post was with the driver provided with Hantek SW ver 1.06. Maybe it's just the summer heat, but I must be missing something here..
horo:
Hi Cliff,
I don't use windows so I have only rudimentary experience but as I learned from win users it would be the best to remove all previous drivers, SW, what else.. and then use zadig to install LibusbK (two times, 1st zadig for device without firmware, VID/PID 0x04B4/0x602A, upload the firmware and then 2nd zadig for device with firmware, VID/PID 0x04B5/0x062A).
Maybe raxis13 can give you some hints how to handle the win installation.
HTH, Martin
Cliff Matthews:
--- Quote from: horo on July 19, 2019, 09:55:29 pm ---Hi Cliff,
I don't use windows so I have only rudimentary experience but as I learned from win users it would be the best to remove all previous drivers, SW, what else.. and then use zadig to install LibusbK (two times, 1st zadig for device without firmware, VID/PID 0x04B4/0x602A, upload the firmware and then 2nd zadig for device with firmware, VID/PID 0x04B5/0x062A).
Maybe raxis13 can give you some hints how to handle the win installation.
HTH, Martin
--- End quote ---
Thanks! A little nervous, but I'll start by reading the info at https://zadig.akeo.ie/ and see how far I get :)
raxis13:
Hi Cliff,
As for my own experience, i suggest you first read my previous posts to Martin on july 10 and 15.
My PC is operating under Windows 10. I couldn't install Libusb driver on this PC, but may be i did some mistake with the modification of libusb_device.inf, or during the installation. So i used Zadig 2.4 https://zadig.akeo.ie/ to install Winusb (but i also installed and used LibusbK with OpenHantek).
Driver installation with Zadig is very simple :
- before any new driver installation, plug Hantek6022BE hardware to your pc. Through Windows Device Manager check that Hantek6022BE (DSO-6022BE) is not installed (you should see a small yellow exclamation panel icon at the left of the name DSO-6022BE). If Hantek6022BE (DSO-6022BE) is installed, uninstall DSO6022 (by a right clic on its name, then Uninstall) and into the next small window which then appear don't forget to check the case Delete driver from your computer. Then unplug Hantek6022BE. If previously you had to uninstall Hantek6022BE, plug Hantek6022BE (DSO-6022BE) and again through Device Manager check once again that no driver remain installed. If yes, uninstall Hantek6022BE (DSO-6022BE) as indicated just before.
- Restart your computer.
- Then Hantek6022BE always plugged, once again through Device Manager check that no driver remain installed.
Now at this stage, no driver should be installed. If no driver is installed (you should see a small yellow exclamation panel icon at the left of the name DSO-6022BE).
- Start Zadig 2.4. Go to Option > List All Devices. Choose DSO-6022BE. Choose the driver you want to install - for instance WinUSB. Clic on Install Driver.
Through Device Manager check that Hantek DSO-6002BE is now correctly installed.
Restart your computer.
Start OpenHantek6022 build 68.
A black msdos window open, and an other one with the title Select Device. In Select Device \ tab Supported Device you could see Upload in progress... Close this window.
Start again OpenHantek6022 build 68. Now Device ready to use should be displayed.
Click OK. Then, OpenHantek6022 window should appear.
Raxis13
horo:
And here it is ... the new release v2.13. There are mostly small changes and clean ups, some new icons and a dB display of the input voltages, scalable as dBV, dBu or dBm@50Ω. The most important change is a extensive User Manual with quick start guide for newbies, technical data and an explanation of all scope functions.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version