Products > Test Equipment

Hantek 6022BE 20MHz USB DSO

<< < (238/241) > >>

larkinsoft:
Hello all! I am looking to purchase a 6022BL from Amazon, but there are two listings for it, one that is simply labeled "6022BL" and another labeled "6022BL - Previous". I asked the seller what the difference is between the two, and they told me it was a single resistor changed on the motherboard, however, they wouldn't tell me what resistor was changed, nor what value it was changed to, citing warranty reasons. :-DD Does anyone know what resistor they are referring to and what value it is on the current model? I would order the current model, if it didn't take two months to arrive, as opposed to the two day arrival of the previous model. Thanks for your time!

Gyro:
You would do well to consider the Owon VDS1022 preferably the 'I' version rather than the 6022BE...

https://www.eevblog.com/forum/testgear/owon-vds1022i-quick-teardown-(versus-the-hantek-6022be)/

EDIT: If you're looking at the BL version then you could buy a $10 Saleae 8 bit 24MHz logic analyser clone to go with it.

horo:

--- Quote from: marabella on January 28, 2022, 09:05:45 pm ---The Windows x64 binary did not work because 2 vcruntime.dll's were missing.
You have to install the vc_redist.x86.exe.
Possibly also the vc_redist.x64.exe.
I could not find a hint anywhere on GitHub. So I just say it here for all newbies.

--- End quote ---
Did you check the provided vc_redist.x64.exe from the *.zip? What was the error message?

horo:

--- Quote from: Zseblampas on January 31, 2022, 09:16:31 am ---...
What the hell is going on?
...

--- End quote ---

What does the program say if started from cmd.exe? Did you play with the options, especially with --verbose? (hint: OpenHantek -h)

--- Code: ---OpenHantek6022 (20220223 - commit 958)
Usage: OpenHantek [options]

Options:
  -?, -h, --help               Displays help on commandline options.
  --help-all                   Displays help including Qt specific options.
  -v, --version                Displays version information.
  -d, --demoMode               Demo mode without scope HW
  -e, --useGLES                Use OpenGL ES instead of OpenGL
  --useGLSL120                 Force OpenGL SL version 1.20
  --useGLSL150                 Force OpenGL SL version 1.50
  -i, --international          Show the international interface, do not
                               translate
  -f, --font <Font>            Define the system font
  -s, --size <Size>            Set the font size (default = 10, 0: automatic
                               from dpi)
  -c, --condensed <Condensed>  Set the font condensed value (default = 87)
  --resetSettings              Reset persistent settings, start with default
  --verbose <Level>            Verbose tracing of program startup, ui and
                               processing steps

--- End code ---
Did you check the signed driver?
https://github.com/OpenHantek/OpenHantek6022#windows-usb-access

Have also a look at #251:
https://github.com/OpenHantek/OpenHantek6022/pull/251

HTH, Martin

horo:
A quick note: If you have questions or want to report issues, please use the correct place, I only read here sporadically.
https://github.com/OpenHantek/OpenHantek6022/discussions
https://github.com/OpenHantek/OpenHantek6022/issues

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod