Products > Test Equipment

Hantek 6022BE 20MHz USB DSO

<< < (239/241) > >>

chinoy:
does this s/w support DSO5000 series from hantek.
Any plans to make it work the DSO5000 or DSO2000 series ?
I have downloaded a copy and plan to test.

horo:
OpenHantek6022 no longer supports the 2xxx and 5xxx series, the last version with support can be found in this branch:
https://github.com/OpenHantek/OpenHantek6022/tree/last_legacy_support
I have abandoned support for the other series because the different communication protocols required compromises that led to limitations, especially with the 6022. I also do not have the necessary hardware for testing.
But you can either take my above-mentioned branch as a starting point for your own developments or revive the currently no longer maintained predecessor project:
https://github.com/OpenHantek/openhantek

chinoy:
I would like to try this s/w with DSO5102P hantek.
Will it work.
Or is there a specific version that I need.
Do I need to install a particular driver to get it to work ?.
Sorry for this noob question.

zaxtone:
Hi.  I use a google translator/
Hello connoisseurs. I wanted to ask first. Is it possible to make friends with a USB oscilloscope with a Bluetooth module?
In my case, this is the damned hantek 6022be, the filling is indicated.

In the presence there is this module HC-06 which is connected via UART protocol

horo:
Hi,

as I recently wrote on GitHub, it is of course not possible to connect the oscilloscope via Bluetooth _instead_of_ USB, as the net data rate is up to 30 MByte/s and now already fully utilises the capacity of a high-speed USB port.
But maybe I misunderstood your idea, please give more details what you really want to do with the HC-06 module.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod