| Products > Test Equipment |
| Hantek CC-65 AC/DC Current Probe Teardown and Testing |
| << < (25/33) > >> |
| Noy:
Argh.. currently i will also do the modification, but still waiting for the opamp.. Unfortunally i purchased a Micsig last year November already.. 800k one.. |
| Bluegizmo83:
--- Quote from: rpress on February 03, 2017, 03:00:00 pm ---I bought a CC-650 with the same unstable supply. I'm my case to solve the problem I put a 0.1uF cap in pins 1&2 of the pads for U5. --- End quote --- Hey I know you posted this several years ago, but can you recall what type and voltage the capacitor was that you used for this for the CC-650? |
| Bluegizmo83:
--- Quote from: rpress on February 03, 2017, 03:00:00 pm ---I bought a CC-650 with the same unstable supply. I'm my case to solve the problem I put a 0.1uF cap in pins 1&2 of the pads for U5. --- End quote --- Just a heads up... I just did this mod on my CC-650 and I don't see any difference at all. I placed a 0.1uF electrolytic capacitor on pins 1 and 2 of U5. No change at all. |
| maxspb69:
0.1uF electrolytic??? |
| Bluegizmo83:
--- Quote from: maxspb69 on February 12, 2021, 06:11:07 am ---0.1uF electrolytic??? --- End quote --- Yes... Why? That's what someone else said they used... |
| Navigation |
| Message Index |
| Next page |
| Previous page |