Products > Test Equipment

Hantek DSO1152S - Wont boot after firmware update

<< < (6/26) > >>

WanaGo:
Here is the output after doing a reboot command from the UART terminal.


--- Quote ---[root@Hantek /]# reboot
save exit: isCheckpointed 0
umount: tmpfs busy - remounted read-only
The system is going down NOW!
s3c2410-wdt s3c2410-wdt: Unexpected close, not stopping watchdog
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
s3c2440-sdi s3c2440-sdi: powered down.
*** Warning - bad CRC or NAND, using default environment



##### EmbedSky BIOS for SKY2440/TQ2440 #####
Press Space key to Download Mode !
Booting Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00200000 ... Copy Kernel to SDRAM done,NOW, Booting Linux......
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.30.4 (root@zgt) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-176) ) #125 Sat Jun 30 17:13:48 CST 2012
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: TQ2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
NR_IRQS:85
irq: clearing pending ext status 00000300
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61260KB available (3160K code, 346K data, 100K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 296 bytes
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
yaffs Jun 30 2012 14:45:29 Installing.
msgmni has been set to 119
alg: No test for stdrng (krng)
io scheduler noop registered (default)
backlight initialized
s3c2440-uart.0: tq2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: tq2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: tq2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=2, 20ns Twrph0=3 30ns, Twrph1=2 20ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"
0x000000200000-0x000000400000 : "EmbedSky_Board_kernel"
0x000000400000-0x000003ff8000 : "EmbedSky_Board_yaffs2"
0x000000100000-0x000000200000 : "EmbedSky_Board_logo"
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
Linux video capture interface: v2.00
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: starting watchdog timer
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq enabled
mapped channel 0 to 0
s3c2440-sdi s3c2440-sdi: powered down.
s3c2440-sdi s3c2440-sdi: initialisation done.
s3c2440-sdi s3c2440-sdi: powered down.
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
  #0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 100K
__init s3c24xxfb_probe
=======================================
map_video_memory(fbi=c3af0a3c) map_size 614400
map_video_memory: clear ffc42000:00096000
map_video_memory: dma=33100000 cpu=ffc42000 size=00096000
setting vert: up=11, low=11, sync=1
setting horz: lft=17, rt=135, sync=11
s3c2410fb_activate_var
S3C2410_LCDCON1_CLKVAL(default_display->setclkval)=1
Console: switching to mono frame buffer device 80x30
fb0: s3c2410fb frame buffer device
hwclock: settimeofday: Invalid argument
bwscon:0x2201d110
fpga bank 221422
dso-fpga: install ok
dso-spi initialized
Init spi success!
New Log Write OK Length:21
s3c2440_clkcon=00FE7FF0
fpga download file_name :dn.rbf
copy-from-user ok
dn_file_name:dn.rbf
fpga_down_load file name : dn.rbf.
data DOWN finish.
dso-spi:FPGA_DOWNLOAD ok.
release
var.xres=640
var.yres=480
var.bits_per_pixel=16
var.xres_virtual=640
var.yres_virtual=480
fix.id=s3c2410fb
fix.smem_start=856686592
fix.smem_len=614400
fix.type=0
fix.type_aux=0
fix.xpanstep=0
fix.ypanstep=0
fix.ywrapstep=0
fix.line_length=1280
argv[1]=16
var.xres=640    var.yres=480    var.bits_per_pixel=16
show logo,video_buf_size = 614400
dm9000 Ethernet Driver, V1.31
Now use the default MAC address: 10:23:45:67:89:ab
eth0 (dm9000): not using net_device_ops yet
eth0: dm9000e at c49b8300,c49bc304 IRQ 53 MAC: 10:23:45:67:89:ab (EmbedSky)
Try to bring eth0 interface up ...
Hantek GPIO(buzzer/speaker),(c)20110309
Hantek-gpio initialized
speaker on
Beep
dso-buzzer initialized
ifconfig eth0 hw ether 10:23:45:67:89:ab
eth0: link down
ifconfig eth0 192.168.1.55 netmask 255.255.255.0 up
/sbin/net_set: line 5: route: not found
add default gw 192.168.1.2
Done
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c: slave address 0x10
pdata->frequency=6000
s3c2440-i2c s3c2440-i2c: bus frequency set to 9 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
s3c2410_udc: debugfs dir creation failed -19
s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
g_serial gadget: Gadget Serial v2.4
g_serial gadget: g_serial ready
lcd_init
dso-lcd1 initialized
tq2440_ts: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
TQ2440 TouchScreen successfully loaded
input: TQ2440 TouchScreen as /devices/virtual/input/input0
Power-Ctrl initialized
no update file to foud
now run app .....
var.xres=640
var.yres=480
var.bits_per_pixel=16
var.xres_virtual=640
var.yres_virtual=480
fix.id=s3c2410fb
fix.smem_stsetting vert: up=11, low=11, sync=1
setting horz: lft=17, rt=135, sync=11
s3c2410fb_activate_var
S3C2410_LCDCON1_CLKVAL(default_display->setclkval)=1
art=856686592
fix.smem_len=614400
fix.type=0
fix.type_aux=0
fix.xpanstep=0
fix.ypanstep=0
fix.ywrapstep=0
fix.line_length=1280
argv[1]=8
var.xres=640    var.yres=480    var.bits_per_pixel=8

Please press Enter to activate this console. setting vert: up=11, low=11, sync=1
setting horz: lft=17, rt=135, sync=11
s3c2410fb_activate_var
S3C2410_LCDCON1_CLKVAL(default_display->setclkval)=1

[root@Hantek /]# killall dsod
[root@Hantek /]# killall dsod
killall: dsod: no process killed
[root@Hantek /]# ls
OurLanguages      fpgabank.conf     lost+found        sys.inf
bin               help.db           mnt               tdc.log
chk_base_volt     home              msg               tdc_edge125M
cur_acq.type      i2c.log           mult_adc.log      tdc_overtime125M
dev               icon              opt               tdc_pulse125M
disk_sta.info     keyprotocol.inf   param             tmp
disp              language.img      proc              tmpdst
dn.rbf            lib               protocol.inf      usr
dso               linuxrc           root              var
dso.exe           logo              sbin
dst1202b          logotype          sendspi
etc               logotype.dis      sys
[root@Hantek /]#

--- End quote ---

WanaGo:
Note quite sure about these dates, as I dont know if the scope knows dates unless on a LAN...?

But some more info:


--- Quote ---[root@Hantek /]# ls -l
total 6549
drwxr-xr-x    1 root     root           512 Jul 13  2014 OurLanguages
drwxr-xr-x    1 root     root           512 Jul  4  2012 bin
-rw-r--r--    1 root     root           275 Jan  1  2009 chk_base_volt
-rw-r--r--    1 root     root             4 Jan  1 00:00 cur_acq.type
drwxrwxrwt    7 root     root          2800 Jan  1 00:00 dev
-rw-r--r--    1 root     root           247 Jul 13  2014 disk_sta.info
-rwxr-xr-x    1 root     root        622551 Aug 24  2012 disp
-rwxrw-rw-    1 root     root        143305 Jul 16  2012 dn.rbf
drwxr-xr-x    1 root     root           512 Jul  4  2012 dso
-rwxrwxrwx    1 root     root       4948860 Jan  1  2009 dso.exe
-rw-r--r--    1 root     root             0 Jan  1  2009 dst1202b
drwxr-xr-x    1 root     root           512 Jul  4  2012 etc
-rw-r--r--    1 root     root             6 Jul  4  2012 fpgabank.conf
-rw-r--r--    1 root     root             0 Jan  1 00:01 frequency=6000
-rw-r--r--    1 1000     root        900096 Jul  2  2013 help.db
drwxr-xr-x    1 root     root           512 Jul  4  2012 home
-rw-r--r--    1 root     root          8192 Jan  1  2009 i2c.log
drwxr-xr-x    1 root     root           512 Jul 13  2014 icon
-rw-r--r--    1 root     root           873 Jul  4  2012 keyprotocol.inf
-rw-r--r--    1 root     root            13 Jan  1  2009 language.img
drwxr-xr-x    1 root     root           512 Jul 13  2014 lib
lrwxrwxrwx    1 root     root            11 Jul  4  2012 linuxrc -> bin/busybox
drwxr-xr-x    1 root     root           512 Jul  4  2012 logo
-rw-r--r--    1 root     root             8 Jan  1 00:00 logotype
-rwxr-xr-x    1 root     root            16 Oct 11  2012 logotype.dis
drwx------    1 root     root           512 Jan  1 00:00 lost+found
drwxr-xr-x    1 root     root           512 Jul  4  2012 mnt
-rw-r--r--    1 root     root             0 Jan  1  2009 msg
-rw-r--r--    1 root     root         50122 Jan  1  2009 mult_adc.log
drwxr-xr-x    1 root     root           512 Jul  4  2012 opt
drwxr-xr-x    1 root     root           512 Jan  1 00:00 param
dr-xr-xr-x   33 root     root             0 Jan  1 00:00 proc
-rw-r--r--    1 root     root          3838 Jul  4  2012 protocol.inf
drwxr-xr-x    1 root     root           512 Jul  4  2012 root
drwxr-xr-x    1 root     root           512 Jul 13  2014 sbin
-rwxrwxrwx    1 root     root          6594 Jul  4  2012 sendspi
drwxr-xr-x   11 root     root             0 Jan  1 00:00 sys
-rw-r--r--    1 root     root           104 Jan  1  2009 sys.inf
-rw-r--r--    1 root     root          2400 Jan  1  2009 tdc.log
-rw-r--r--    1 root     root          1113 Jan 14  2009 tdc_edge125M
-rw-r--r--    1 root     root          1115 Jan  1  2009 tdc_overtime125M
-rw-r--r--    1 root     root          1084 Jan 14  2009 tdc_pulse125M
drwxrwxrwt    2 root     root            80 Jan  1 00:00 tmp
-rw-r--r--    1 root     root            10 Jul 13  2014 tmpdst
drwxr-xr-x    1 root     root           512 Jan  1  2009 usr
drwxr-xr-x    1 root     root           512 Jan  1 00:00 var
[root@Hantek /]#

--- End quote ---

WanaGo:
Is the solution to this going to be to fix the script, and re-encode the up file and get the scope to update itself again?
or should I manually do each of the steps in the update file, but fix the dso.exe manually at the end?

Looking in the update file, it has:


--- Quote ---[DST type]dso1000b
[soft version]2.01.1(999999.0)
[type]123
[cmd] mv /tmp/tekwayup_client/dso.exe   /dso.exe
[cmd] mv /tmp/tekwayup_client/help.db /help.db
[cmd] mv /tmp/tekwayup_client/DMM_ALERT_RANGER_CHANGE.ico /icon
[cmd] mv /tmp/tekwayup_client/brand.ico /icon
[cmd] mv /tmp/tekwayup_client/dso-buzzer.ko   /dso/driver/
[cmd] mv /tmp/tekwayup_client/dso-spi.ko   /dso/driver/
[cmd] rm /OurLanguages/*.lan
[cmd] mv /tmp/tekwayup_client/OurLanguages/*.lan /OurLanguages/
[cmd] mv /tmp/tekwayup_client/amixer   /sbin/
[cmd] rm /lib/libasound.so -r
[cmd] rm /lib/libasound.so.2 -r
[cmd] mv /tmp/tekwayup_client/libasound.so.2.0.0 /lib/
[cmd] ln -s /lib/libasound.so.2.0.0 /lib/libasound.so
[cmd] ln -s /lib/libasound.so.2.0.0 /lib/libasound.so.2
[cmd] cp /tmp/tekwayup_client/local /usr/ -rf
[cmd] chmod 777 /sbin/amixer
[cmd] chmod 777 /sbin/mplayer
[cmd] mv /tmp/tekwayup_client/libgif.so.6.0.1 /lib/
[cmd] ln -s /lib/libgif.so.6.0.1 /lib/libgif.so.6
[cmd] rm /sys.inf
[cmd] mv /tmp/tekwayup_client/sys.inf /sys.inf
[cmd] sync
[cmd] sync
[cmd] sync
[end]
--- End quote ---

tinhead:
ok, i've installed handheld image, updated to their latest zimage, installed that update for S models and my dev board is now boot looping as well. Good (at least i have same shit now).

Try following:
- on the shell go to /dso/app/ directory
- rename the dsod in that dir to dsod.old (mv dsod dsod.old)
- reboot DSO

WanaGo:
Ran the update again while monitoring the serial port, this is what resulted

(Took out the rubbish in between which padded it out, normal talk when dso.exe is running)


--- Quote ---rm: can't remove '/tmp': Device or resource busy
mkdir: can't create directory '/tmp/': File exists
gpg: directory `/root/.gnupg' created
gpg: can't open `/work/handheld_scope/project_handheld_dso/dso_handheld_env/third_part/4.3.3/arm-none-linux-gnueabi/libc/usr/share/gnupg/options.skel': No such file or directory
gpg: keyring `/root/.gnupg/secring.gpg' created
gpg: keyring `/root/.gnupg/pubring.gpg' created
gpg: CAST5 encrypted data
gpg: encrypted with 1 passphrase
gpg: WARNING: message was not integrity protected
gpg: CAST5 encrypted data
gpg: encrypted with 1 passphrase
gpg: WARNING: message was not integrity protected
dso1kb_2.01.1_.up.tar
tekwayup_client/
tekwayup_client/special
tekwayup_client/sys.inf
tekwayup_client/local/
tekwayup_client/local/share/
tekwayup_client/local/share/smixer.conf
tekwayup_client/local/share/pcm/
tekwayup_client/local/share/pcm/dsnoop.conf
tekwayup_client/local/share/pcm/center_lfe.conf
tekwayup_client/local/share/pcm/side.conf
tekwayup_client/local/share/pcm/dmix.conf
tekwayup_client/local/share/pcm/surround71.conf
tekwayup_client/local/share/pcm/surround40.conf
tekwayup_client/local/share/pcm/rear.conf
tekwayup_client/local/share/pcm/front.conf
tekwayup_client/local/share/pcm/iec958.conf
tekwayup_client/local/share/pcm/dpl.conf
tekwayup_client/local/share/pcm/surround50.conf
tekwayup_client/local/share/pcm/surround51.conf
tekwayup_client/local/share/pcm/default.conf
tekwayup_client/local/share/pcm/surround41.conf
tekwayup_client/local/share/pcm/modem.conf
tekwayup_client/local/share/pcm/hdmi.conf
tekwayup_client/local/share/cards/
tekwayup_client/local/share/cards/aliases.conf
tekwayup_client/local/share/cards/VXPocket440.conf
tekwayup_client/local/share/cards/FM801.conf
tekwayup_client/local/share/cards/CMI8338-SWIEC.conf
tekwayup_client/local/share/cards/ENS1370.conf
tekwayup_client/local/share/cards/VX222.conf
tekwayup_client/local/share/cards/VIA8233.conf
tekwayup_client/local/share/cards/VXPocket.conf
tekwayup_client/local/share/cards/ICH.conf
tekwayup_client/local/share/cards/GUS.conf
tekwayup_client/local/share/cards/Audigy.conf
tekwayup_client/local/share/cards/PS3.conf
tekwayup_client/local/share/cards/VIA686A.conf
tekwayup_client/local/share/cards/USB-Audio.conf
tekwayup_client/local/share/cards/SI7018.conf
tekwayup_client/local/share/cards/ICE1724.conf
tekwayup_client/local/share/cards/ATIIXP-MODEM.conf
tekwayup_client/local/share/cards/CMI8738-MC6.conf
tekwayup_client/local/share/cards/NFORCE.conf
tekwayup_client/local/share/cards/CA0106.conf
tekwayup_client/local/share/cards/ENS1371.conf
tekwayup_client/local/share/cards/ICH4.conf
tekwayup_client/local/share/cards/ATIIXP.conf
tekwayup_client/local/share/cards/EMU10K1.conf
tekwayup_client/local/share/cards/si7018/
tekwayup_client/local/share/cards/si7018/sndoc-mixer.alisp
tekwayup_client/local/share/cards/si7018/sndop-mixer.alisp
tekwayup_client/local/share/cards/RME9652.conf
tekwayup_client/local/share/cards/ATIIXP-SPDMA.conf
tekwayup_client/local/share/cards/CS46xx.conf
tekwayup_client/local/share/cards/CMI8338.conf
tekwayup_client/local/share/cards/ICH-MODEM.conf
tekwayup_client/local/share/cards/PC-Speaker.conf
tekwayup_client/local/share/cards/Audigy2.conf
tekwayup_client/local/share/cards/Maestro3.conf
tekwayup_client/local/share/cards/TRID4DWAVENX.conf
tekwayup_client/local/share/cards/VIA8233A.conf
tekwayup_client/local/share/cards/ES1968.conf
tekwayup_client/local/share/cards/RME9636.conf
tekwayup_client/local/share/cards/EMU10K1X.conf
tekwayup_client/local/share/cards/SB-XFi.conf
tekwayup_client/local/share/cards/PMacToonie.conf
tekwayup_client/local/share/cards/VIA8237.conf
tekwayup_client/local/share/cards/AU8820.conf
tekwayup_client/local/share/cards/Aureon51.conf
tekwayup_client/local/share/cards/AU8830.conf
tekwayup_client/local/share/cards/CMI8788.conf
tekwayup_client/local/share/cards/AACI.conf
tekwayup_client/local/share/cards/CMI8738-MC8.conf
tekwayup_client/local/share/cards/HDA-Intel.conf
tekwayup_client/local/share/cards/YMF744.conf
tekwayup_client/local/share/cards/PMac.conf
tekwayup_client/local/share/cards/aliases.alisp
tekwayup_client/local/share/cards/ICE1712.conf
tekwayup_client/local/share/cards/Aureon71.conf
tekwayup_client/local/share/cards/AU8810.conf
tekwayup_client/local/share/sndo-mixer.alisp
tekwayup_client/local/share/alsa.conf
tekwayup_client/help.db
tekwayup_client/libgif.so.6.0.1
tekwayup_client/DMM_ALERT_RANGER_CHANGE.ico
tekwayup_client/dn.rbf
tekwayup_client/dso-buzzer.ko
tekwayup_client/brand.ico
tekwayup_client/amixer
tekwayup_client/OurLanguages/
tekwayup_client/OurLanguages/English.lan
tekwayup_client/OurLanguages/Chinese.lan
tekwayup_client/OurLanguages/Tridchn.lan
tekwayup_client/dso.exe
tekwayup_client/update~
tekwayup_client/update
tekwayup_client/.sys.inf.swp
tekwayup_client/rcS~
tekwayup_client/dso-spi.ko
tekwayup_client/libasound.so.2.0.0
upend

RIGHT VERSION TO UPDATE!

rm: can't remove '/lib/libasound.so': Directory not empty
rm: can't remove '/lib/libasound.so.2': Directory not empty
ln: /lib/libasound.so: File exists
ln: /lib/libasound.so.2: File exists
ln: /lib/libgif.so.6: File exists

*** Warning - bad CRC or NAND, using default environment

##### EmbedSky BIOS for SKY2440/TQ2440 #####
Press Space key to Download Mode !
Booting Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00200000 ... Copy Kernel to SDRAM done,NOW, Booting Linux......
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.30.4 (root@zgt) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-176) ) #125 Sat Jun 30 17:13:48 CST 2012

--- End quote ---

etc etc, as it reboots...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod