| Products > Test Equipment |
| Hantek DSO1152S - Wont boot after firmware update |
| << < (8/26) > >> |
| WanaGo:
[root@Hantek /]# chmod 777 * [root@Hantek /]# hmm Also in that rcS file, it looks like it is still looking for dso_update.exe ? |
| tinhead:
--- Quote from: WanaGo on July 13, 2014, 12:23:31 pm ---[root@Hantek /]# chmod 777 * [root@Hantek /]# hmm Also in that rcS file, it looks like it is still looking for dso_update.exe ? --- End quote --- this is exactly what i sadi, Hantek implemented that check into rcS but since i don't know when exactly, they overwriting the running dso.exe with new one during firmware update (which never works on my systems). anyway, this is not the point here, leave that as it is. All you can do now is try again to: - kill dsod (in case still there, but you renamed it so should be ok now) - kill dso.exe - copy the new dso.exe into / - in / chmod 777 * - rm /param/sav/r* - power cycle DSO and watch what is doing in principle it have to work now. If now tell me what you see (segfault again? is something on screen/key reaction?) |
| WanaGo:
Its still the same. Boots the first logo, 2nd logo, then goes black screen. UART just outputs the same stuff: --- Quote ---tq2440_ts: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint TQ2440 TouchScreen successfully loaded input: TQ2440 TouchScreen as /devices/virtual/input/input0 Power-Ctrl initialized no update file to foud now run app ..... /etc/init.d/rcS: line 63: /dso/app/dsod: not found var.xres=640 var.yres=480 var.bits_per_pixel=16 var.xres_virtual=640 var.yres_virtual=480 fix.id=s3c2410fb fix.smem_stasetting vert: up=11, low=11, sync=1 setting horz: lft=17, rt=135, sync=11 s3c2410fb_activate_var S3C2410_LCDCON1_CLKVAL(default_display->setclkval)=1 rt=856686592 fix.smem_len=614400 fix.type=0 fix.type_aux=0 fix.xpanstep=0 fix.ypanstep=0 fix.ywrapstep=0 fix.line_length=1280 argv[1]=8 var.xres=640 var.yres=480 var.bits_per_pixel=8 Please press Enter to activate this console. setting vert: up=11, low=11, sync=1 setting horz: lft=17, rt=135, sync=11 s3c2410fb_activate_var S3C2410_LCDCON1_CLKVAL(default_display->setclkval)=1 --- End quote --- Sits there, black screen. Doesnt boot into dso.exe |
| tinhead:
hmm, do you want to try to downgrade te firmware? here on my onedrive http://1drv.ms/1hf4SgO you will find in "DSO hacks->firmware->hw1.00.4" older fw versions. While downgrading all you have to do is to copy to your DSO is then the dso.exe and English.lan from the older firmware version (so you have to use gpg, winrar again to get them). killall dso.exe cd / cp /mnt/udisk/dso.exe /dso.exe rm /OurLanguages/* cp /mnt/udisk/Engish.lan /OurLanguages/ chmod 777 * |
| WanaGo:
Ran the last command from the rcS file manually, to see what happens --- Quote ---[root@Hantek /]# ./dso.exe & [root@Hantek /]# setting vert: up=11, low=11, sync=1 setting horz: lft=17, rt=135, sync=11 s3c2410fb_activate_var S3C2410_LCDCON1_CLKVAL(default_display->setclkval)=1 --- End quote --- Which is what I get on the UART when it does it itself. running ./dso.exe works fine. it running ./dso.exe & however doesnt work fine --- Quote ---[root@Hantek /]# ./dso.exe s3c2440_clkcon=00FFFFF0 MachineFunctionLimitByBrandType InitLcdShowBasic:0x40b92000 s3c2440_clkcon=00FFFFF0 MachineFunctionLimitByBrandType ***************************Stat_ShowBattery:0, 0 ***************************Stat_ShowBattery:0, 0 save exit: isCheckpointed 0 INIT SYS OK! ***************************Stat_ShowBattery:1, 0 ***************************Stat_ShowBattery:1, 0 ******************no data cnt=-1************************ ***************************Stat_ShowBattery:1, 0 ***************************Stat_ShowBattery:1, 0 ***************************Stat_ShowBattery:1, 0 ******************no data cnt=-1************************ ***************************Stat_ShowBattery:1, 0 ***************************Stat_ShowBattery:1, 0 ******************no data cnt=-1************************ --- End quote --- |
| Navigation |
| Message Index |
| Next page |
| Previous page |