Products > Test Equipment
Hantek Firmware upgrade fails...
(1/1)
tgeehobby:
Hi,
I have a DSO5102B, with pretty old firmware… 2.06.2 (101108.0), and am trying to upgrade.
I have d/l the latest version, 20190830 from the Hantek support site, and put the .up file on a USB, however all attempts to update give the same failure… Error 0xfe … no upgrade files detected.

I have tried many different USB devices… some small, some large – nothing works.

Could it be that my existing firmware needs an intermediate upgrade to something more recent than 2010.. before it will accept upgrade to 2019 version?

I am not trying to upgrade to 200MHz... just update the firmware to current release.  100Mhz is fine for my use.

PS I tried replying to a similar post from years ago, but got no response... so, trying a new post
Also tried emailing Hantek support... got no reply

Any help appreciated,
Thanks.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod