| Products > Test Equipment |
| Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see! |
| << < (45/134) > >> |
| fremen67:
--- Quote from: tinhead on June 29, 2014, 09:51:25 am ---Note: i named your fw HTG-1.00.1(131107.0) , because this is the /afg_bin time stamp Note: in report, red - different binary, blue - missing on the other side. --- End quote --- A lot of modifications indeed. I hope someone will post its 1.00.2 version soon ... |
| FrankenPC:
@Fremen67 Sorry for the delay. Was this what you wanted? Both sine and square waves were perfectly stable with the generator clock out. |
| fremen67:
--- Quote from: FrankenPC on July 04, 2014, 09:04:57 pm ---@Fremen67 Sorry for the delay. Was this what you wanted? Both sine and square waves were perfectly stable with the generator clock out. --- End quote --- Yes exactly. Thanks a lot! :) So if you did not see any jitter on it, that means that the jitter you saw with you previous tests comes from the way the HDG is generating the signal with build in waveforms. Plus the frequency seems to be more accurate, isn't it? It would mean that at least from a hardware point of view the HDG is not that bad. It could be interresting to do some SA again but using the arb function with "clean" files for that. I would bet that the results would be different from the first one. I have no hardware for that but if someone can do this, I could post a tool to generate .hwf files for TTSource. |
| idpromnut:
@fremen67/FrankenPC: How do I get the HDG connected to TTsource? I tried following your instructions above, and while I can load the wave data into TTsource, I can't seem to connect to the funct gen or remotely control the generator. Is there additional software that needs to be installed aside from TTsource? |
| FrankenPC:
--- Quote from: idpromnut on July 04, 2014, 11:18:06 pm ---@fremen67/FrankenPC: How do I get the HDG connected to TTsource? I tried following your instructions above, and while I can load the wave data into TTsource, I can't seem to connect to the funct gen or remotely control the generator. Is there additional software that needs to be installed aside from TTsource? --- End quote --- I had the same problem. I switched USB ports and the problem went away. The USB driver is garbage. It leaks like a sieve. At least the Windows 7 64bit one does. The driver actually blue screened my laptop once. |
| Navigation |
| Message Index |
| Next page |
| Previous page |