Products > Test Equipment
Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see!
<< < (47/134) > >>
rosasharn:
If it has jitter problem with the input of 10MHz external reference input (BNC) of HDG2000B series?
fremen67:
For those wanting to make a backup of your HDG, or having the last firmware (1.00.2) and wanting to share it, you will find attach a tools which ease the nand dump. So you will have no excuses now.  ;)

- Copy nandbackup.tar on a USB stick and plug it into you HDG
- Connect to you HDG via the serial console
- Go to /mnt/udisk directory (cd /mnt/udisk)
- Extract the attached tar file (tar -xvf nandbackup.tar)
- Launch the script (./nandbackup)
- After 15 min you will have your full nand backup compressed into the dump.tar.gz file
- Keep it in a save place (and share it?)

Enjoy!


rosasharn:
Many thank! You're really helpful, fremen67.  :-+
rosasharn:
Is this HDG has frequency counter?
idpromnut:

--- Quote from: rosasharn on July 16, 2014, 01:20:54 am ---Is this HDG has frequency counter?

--- End quote ---

Two actually :)  A LF one and a HL one, but you need to populate the HF BNC connector.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod