Products > Test Equipment

Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see!

<< < (47/134) > >>

rosasharn:
If it has jitter problem with the input of 10MHz external reference input (BNC) of HDG2000B series?

fremen67:
For those wanting to make a backup of your HDG, or having the last firmware (1.00.2) and wanting to share it, you will find attach a tools which ease the nand dump. So you will have no excuses now.  ;)

- Copy nandbackup.tar on a USB stick and plug it into you HDG
- Connect to you HDG via the serial console
- Go to /mnt/udisk directory (cd /mnt/udisk)
- Extract the attached tar file (tar -xvf nandbackup.tar)
- Launch the script (./nandbackup)
- After 15 min you will have your full nand backup compressed into the dump.tar.gz file
- Keep it in a save place (and share it?)

Enjoy!


rosasharn:
Many thank! You're really helpful, fremen67.  :-+

rosasharn:
Is this HDG has frequency counter?

idpromnut:

--- Quote from: rosasharn on July 16, 2014, 01:20:54 am ---Is this HDG has frequency counter?

--- End quote ---

Two actually :)  A LF one and a HL one, but you need to populate the HF BNC connector.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod