Products > Test Equipment
Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see!
tridentsx:
Is the USB driver available somewhere for download ? Wanted to see if I can connect to the HDG using ttsource.
fremen67:
--- Quote from: tridentsx on February 01, 2015, 09:32:32 am ---
Is the USB driver available somewhere for download ? Wanted to see if I can connect to the HDG using ttsource.
--- End quote ---
They are on the mini CD that comes with the HDG.
You can also download the files from Hantek site:
http://www.hantek.com/Product/HDG2000/HDG2000B_Driver.zip
http://www.hantek.com/Product/HDG2000/HDG2000B_Software.zip
http://www.hantek.com/Product/HDG2000/HDG2000B_Manual.zip
Bugdozer:
I received a HDG2022B this past week and decided the to the hack. Only problem is I'm getting garbage on the Kitty console. I'm assuming this is a serial connection but what is the baud, data, parity on the Hantek? Sorry if this was covered, I look around a lot but diden't find anything. Thanks!
fremen67:
--- Quote from: Bugdozer on February 02, 2015, 04:08:21 pm ---I received a HDG2022B this past week and decided the to the hack. Only problem is I'm getting garbage on the Kitty console. I'm assuming this is a serial connection but what is the baud, data, parity on the Hantek? Sorry if this was covered, I look around a lot but diden't find anything. Thanks!
--- End quote ---
115200 Bauds, 8 bits data, 1 stop bit, no parity should work.
Bugdozer:
Thanks, I'll give it a try this evening.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version