Products > Test Equipment
Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see!
<< < (95/134) > >>
markone:

--- Quote from: fremen67 on March 06, 2015, 04:57:43 pm ---
> What kind of scope do you have? At least if you don't have a rigol ds1000Z, you can use the exel calibration tool ...


--- End quote ---

Hi fremen,

i do have a DS1074Z and i'm going to follow your suggestion using your tool to calibrate the generator, i have to prepare a pc with the necessary software.

Thanks for your attention :-)
fremen67:

--- Quote from: markone on March 06, 2015, 08:22:20 pm ---
--- Quote from: fremen67 on March 06, 2015, 04:57:43 pm ---
> What kind of scope do you have? At least if you don't have a rigol ds1000Z, you can use the exel calibration tool ...


--- End quote ---

Hi fremen,

i do have a DS1074Z and i'm going to follow your suggestion using your tool to calibrate the generator, i have to prepare a pc with the necessary software.

Thanks for your attention :-)

--- End quote ---
You are welcome  ;)
In fact the excel tool was meant to be a prototype. May be should I port it to .Net so that it would be easier to use as a standalone application.
smgvbest:

--- Quote from: fremen67 on March 06, 2015, 08:43:04 pm ---
--- Quote from: markone on March 06, 2015, 08:22:20 pm ---
--- Quote from: fremen67 on March 06, 2015, 04:57:43 pm ---
> What kind of scope do you have? At least if you don't have a rigol ds1000Z, you can use the exel calibration tool ...


--- End quote ---

Hi fremen,

i do have a DS1074Z and i'm going to follow your suggestion using your tool to calibrate the generator, i have to prepare a pc with the necessary software.

Thanks for your attention :-)

--- End quote ---
You are welcome  ;)
In fact the excel tool was meant to be a prototype. May be should I port it to .Net so that it would be easier to use as a standalone application.

--- End quote ---

That would be cool
one comment would be if possible make it so the user could enter thier SCPI commands into a dialog so maybe it could support more scopes and maybe a DMM.   I have a Rigol DM3068 I could test with for you.
markone:
UPDATE :

i just completed a manual calibration round for channel one (a huge PITA at best), now self test is GO !

For channel two i will go with fremen script as soon as i will be ready with "SW platform" :-)

@fremen67 : 67 is your year of birth ?


 
Bryan:

--- Quote from: fremen67 on May 04, 2014, 01:20:00 am ---
Want to play?
Just connect your USB to TTL interface to the board (the one you used for your Hantek MSO/DSO hack, and yes on the same pins), start your console (Kitty or whatever you like) and power up! Go to /etc if you have software 1.00.1 or /dso/root if you have software 1.00.2, edit system.inf and replace HDG2002B with HDG2102C, save, reboot (if you don't manually reboot after the system.inf modification, you will lose the modification after the next Power OFF/ Power ON)… and that’s it.

--- End quote ---

Curious as if the above hack will still work with the current HDG2002B models for sale.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod