| Products > Test Equipment |
| Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see! |
| << < (101/134) > >> |
| rosasharn:
Could built-in waveforms like StairUp, StairDn, StairUD, PPulse, NPulse, Trapezia, UpRamp, Dn, Ramp, Cardiac, Earthquake and common mathematical waveforms be preloaded onto HDG2000B? |
| rosasharn:
--- Quote from: rosasharn on April 02, 2015, 07:18:48 am ---Could built-in waveforms like StairUp, StairDn, StairUD, PPulse, NPulse, Trapezia, UpRamp, Dn, Ramp, Cardiac, Earthquake and common mathematical waveforms be preloaded onto HDG2000B? --- End quote --- Anyone has clue about it? |
| rosasharn:
How to establish communication with the device using the USB port on the back of the HDG2000B? |
| Starcruiser:
@fremen67, I was looking up colorcoding for the chip inductors and depending on size they will either have no color coding, be a single color or have multiple dots which follow typical resistor coding nomenclature 1st 2nd, multiplier (zero's), see graphic |
| Starcruiser:
--- Quote from: fremen67 on March 24, 2015, 01:36:53 am ---So I finally received my 34401A :) Here is the modified version of the HDG calibration tool with: - Excel x64 support (thank you smgvbest for the feedback) - 34401A DMM support for DC values - Rigol DS/MSO2000A support thanks to flatlander - Excel sheet update improvement If you don't want to use a device (DMM or DSO), just leave the adresss/alias empty. The DSO detection type is done using the IDN string so it should be able to detect a DS/MSO1000Z and DS/MSO2000A (hopefully :P). Depending on the calibration value type, you should be prompted to connect the correct device to the HDG. I also wanted to add a progress status bar but it's bed time here ... Hope this will help! --- End quote --- Will this work with the DS5202P as a data source? I read that you wrote this for the MSO series but did not see anyting about the DSO mentioned, perhaps I missed it. I would use this with Win7 64bit OS as well. |
| Navigation |
| Message Index |
| Next page |
| Previous page |