| Products > Test Equipment |
| Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see! |
| << < (13/134) > >> |
| trevwhite:
I really do not need one of these at the moment but I am trying to figure out if its just too good a deal to pass up on right now. The site is terrible! There is always some great hack on a piece of equipment that makes me want to buy the equipment. Anyone done any more testing? I am working on the idea that the current software is probably the only one that is going to work with the hack so its current state is all I would be able to use. So how many of the features work properly? |
| FrankenPC:
Update: Previously I attempted to buy a HDG2002B from Ebay and the seller (like a lot of sellers) does drop shipping from Hantek to you. they said that Hantek is now delaying delivery by 3-4 weeks. SO, I went to Amazon and the seller there just told me the same thing (M&A Instruments). I ended up getting one on Ebay from a seller who said they actually have them in stock. We'll see if he's a liar. |
| idpromnut:
So after updating my HDG2002, I ran a few tests on the various function types at the maximum settings. I will provide a better writeup later, but essentially the triangle, square and pulse modes degrade rapidly in both signal shape and strength as the frequency increases past 10MHz. The sine output is great up to about 95MHz. |
| leppie:
--- Quote from: idpromnut on May 16, 2014, 04:52:08 pm ---So after updating my HDG2002, I ran a few tests on the various function types at the maximum settings. I will provide a better writeup later, but essentially the triangle, square and pulse modes degrade rapidly in both signal shape and strength as the frequency increases past 10MHz. The sine output is great up to about 95MHz. --- End quote --- What amplitude did you use? I recall seeing it says only 2Vpp for maximum (not sure what waveform that was though). |
| idpromnut:
--- Quote from: FrankenPC on May 16, 2014, 02:55:32 pm ---Update: Previously I attempted to buy a HDG2002B from Ebay and the seller (like a lot of sellers) does drop shipping from Hantek to you. they said that Hantek is now delaying delivery by 3-4 weeks. SO, I went to Amazon and the seller there just told me the same thing (M&A Instruments). I ended up getting one on Ebay from a seller who said they actually have them in stock. We'll see if he's a liar. --- End quote --- Sorry I am late on this, but I bought mine here eBay auction: #291122464618 and the experience was extremely positive. Took a bit for me to figure out the offer (290$ + shipping USD) but once shipped the item arrived here in about 4 days (via DHL, brokerage charges of about 35$CAD. I would highly recommend. EDIT: that seller only has one left! |
| Navigation |
| Message Index |
| Next page |
| Previous page |