Products > Test Equipment
Hantek HDG2002B AWG: 5Mhz or 100MHz? Let's see!
<< < (17/134) > >>
tinhead:

--- Quote from: idpromnut on May 18, 2014, 04:44:30 am ---One thing of note is the "noisy" sine as one approaches 100MHz.

--- End quote ---

aha, and how it looks like near 100MHz? let say 90MHz, 95MHz, 98MHz, etc.
idpromnut:

--- Quote from: tinhead on May 18, 2014, 06:33:41 pm ---
--- Quote from: idpromnut on May 18, 2014, 04:44:30 am ---One thing of note is the "noisy" sine as one approaches 100MHz.

--- End quote ---

aha, and how it looks like near 100MHz? let say 90MHz, 95MHz, 98MHz, etc.

--- End quote ---

I would have to run another capture, but I do remember seeing the "glitches" as low as 30MHz, but they were more infrequent.
fremen67:

--- Quote from: tinhead on May 18, 2014, 06:31:16 pm ---btw, the SCPI implementation is using Agilent VID/PID, so one can use Agilent I/O Suite drivers instead of Hantek driver.
Sure, the Hantek app will then not work anymore (oh well, it is not working for me), but instead of that one can use any VISA/SCPI application. Interessting is the name displayed, htg1102a (instead of HTG2xxxx what so ever). Attached picture is made of HTG2xxx dump running on S3C2416 dev board (i wish i could play with real HTG, but for now it is enought to do things on dev board).

--- End quote ---

This is what I see with Agilent Connection Expert when I connect my HDG. Did I miss something?
fremen67:

--- Quote from: tinhead on May 18, 2014, 06:31:16 pm ---Interessting is the name displayed, htg1102a (instead of HTG2xxxx what so ever).

--- End quote ---
Remember that? Sounds like "Déjà vu" no?  ;) Look at the pictures of your post:
https://www.eevblog.com/forum/reviews/new-hantek-gears-released/msg75519/#msg75519
tinhead:

--- Quote from: fremen67 on May 18, 2014, 08:32:31 pm ---This is what I see with Agilent Connection Expert when I connect my HDG. Did I miss something?

--- End quote ---

that looks like timeout error, my PC need a while to identify that device. Btw, i'm using 15.5 and you 16.something.


--- Quote from: fremen67 on May 18, 2014, 08:48:47 pm ---
--- Quote from: tinhead on May 18, 2014, 06:31:16 pm ---Interessting is the name displayed, htg1102a (instead of HTG2xxxx what so ever).

--- End quote ---
Remember that? Sounds like "Déjà vu" no?  ;) Look at the pictures of your post:
https://www.eevblog.com/forum/reviews/new-hantek-gears-released/msg75519/#msg75519

--- End quote ---

yeah, i know, they used that name in the past. There is as well somethign from an OEM,

http://www.mrclab.com/Media/Uploads/HTG1000A-SPEC.pdf

so probably only name thing.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod