EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: WanaGo on October 19, 2021, 02:15:33 am
-
Hi All,
Has anyone seen or tried out the Hantek HDP4000 series PSU's yet, like the HDP4324B for example.
http://www.hantek.com/products/detail/17188 (http://www.hantek.com/products/detail/17188)
I found a video here, in Chinese, but it at least shows it. https://www.bilibili.com/s/video/BV14R4y1H7KK (https://www.bilibili.com/s/video/BV14R4y1H7KK)
I have had a Hantek PPS2320A PSU since 2013, and it has served me well. Cost me $100 USD at the time. I use all the functions all the time, but it has developed very weird faults and something is wrong with the controller as 90% of the time when pushing the Output enable button then output will jump to Max Voltage/Current, which leads to you blowing up what you have connected - so a bit of a pain. Time for something new.
Hantek quoted me $500 USD delivered, direct. Rather expensive, but looking at the Hantek page above, it has some rather neat features.
Thoughts?