Products > Test Equipment
Hantek 4032L Logic Analyzer
Fraser:
I was pleased to see known brands of chips in the unit and I am also pleased to hear that they have used a relatively expensive Cypress chip. It may not be the most cost effective solution but I hope this means that the unit is not a cheapo, built down to a budget product using the very cheapest parts available. I am also pleased to see that no silly chip anonymisation has been done !
Thanks for the comments on the design, most welcome. I only hope the software is worthy of the hardware !
I don't have time to 'play' at the moment, so pictures of the software working will need to wait a little.
marmad:
--- Quote from: Aurora on April 30, 2013, 08:59:44 am ---I was pleased to see known brands of chips in the unit and I am also pleased to hear that they have used a relatively expensive Cypress chip. It may not be the most cost effective solution but I hope this means that the unit is not a cheapo, built down to a budget product using the very cheapest parts available. I am also pleased to see that no silly chip anonymisation has been done !
--- End quote ---
It's a pity they didn't provide a Trigger Out - very little extra cost to do it - and it really should be standard with LAs.
--- Quote ---Thanks for the comments on the design, most welcome. I only hope the software is worthy of the hardware !
--- End quote ---
Not to jump the gun on your review, but the software looks exactly the same as the software for their old LA (LA5034), which hadn't gotten very good reviews by a previous owner here. Oh well, Hantek software (and you can say the same for pretty much all Chinese test equipment manufacturers) is generally crap - so you just have to resort to writing your own.
tinhead:
--- Quote from: marmad on May 03, 2013, 12:57:46 am ---
--- Quote from: Aurora on April 30, 2013, 08:59:44 am ---I was pleased to see known brands of chips in the unit and I am also pleased to hear that they have used a relatively expensive Cypress chip. It may not be the most cost effective solution but I hope this means that the unit is not a cheapo, built down to a budget product using the very cheapest parts available. I am also pleased to see that no silly chip anonymisation has been done !
--- End quote ---
It's a pity they didn't provide a Trigger Out - very little extra cost to do it - and it really should be standard with LAs.
--- End quote ---
i bet this USBXI port provide trigger out as it can be used to sync multiple devices (as far i understood).
The problem is, i don't see any pinout nor documentation published :palm:
marmad:
--- Quote from: tinhead on May 03, 2013, 09:35:55 am ---i bet this USBXI port provide trigger out as it can be used to sync multiple devices (as far i understood).
The problem is, i don't see any pinout nor documentation published :palm:
--- End quote ---
Maybe, but even if true, it's certainly not handy on a card-edge connector.
JimmyMz:
I guess there isn't much to say about this LA, or am I reading the 2+ weeks of time w/o a review poorly?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version