Author Topic: Hantek - Tekway - DSO hack - get 200MHz bw for free  (Read 1658412 times)

0 Members and 8 Guests are viewing this topic.

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 2067
  • Country: ca
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3025 on: October 02, 2019, 12:24:52 pm »
thks @PeDre
 

Offline Appocalypse_br

  • Contributor
  • Posts: 10
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3026 on: October 02, 2019, 05:54:20 pm »
Hi is there any chance i can do this in the PC USB 6104bc series, mine seems to be dead, if anyone have some info how to write\hack into these models will be great.

Or if you have the same one and send me the firmware eeprom etc will be nice!

Thanks!
 

Offline BobGeorge976

  • Newbie
  • Posts: 2
  • Country: cs
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3027 on: October 03, 2019, 07:12:29 pm »
Hello! Today I've got my Hantek DSO5072p and I have crossed over this topic and to me is still unclear is it possible to upgrade this device ... or not? Thanks in forward!
If you want to rise - first you have to fall!
 

Offline BobGeorge976

  • Newbie
  • Posts: 2
  • Country: cs
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3028 on: October 03, 2019, 07:41:51 pm »
 My Hantek 5072p already goes to 2ns but my sw is older. Any sugestions what should I do?  :-//
« Last Edit: October 03, 2019, 07:48:28 pm by BobGeorge976 »
If you want to rise - first you have to fall!
 

Offline Slash200

  • Newbie
  • Posts: 2
  • Country: de
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3029 on: October 07, 2019, 06:07:29 pm »


download from my 1drv, from firmware, version, model folder the proper/latest file.

There is even a way to run firmware from Feb 2018 on hw1007 platform (like i do on my old hw1007),
but it's bit tricky (one have to copy over ssh some libs first, updates can be done only over lan/uart by copying latest only executable file).

Is it possible to you provide a manual how to do the update to the Feb 2018 Firmware?
I have firmware 2.06.3(130425.0) installed at the moment.
 

Offline TateRB

  • Newbie
  • Posts: 1
  • Country: us
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3030 on: October 10, 2019, 11:52:39 pm »
This is my first post here after reading this thread for a while and doing some searching.  In the 100+ pages of this topic, I'm sure I missed what I'm looking for. I already have a 200Mhz scope, but need some help with the firmware and backups.

I followed recommendation from someone on here to email support@hantek.com. They sent me a link to a file (See info below) but no info in it. It leaves me wondering what it is and what is changed from the version that is in the scope now.

After reading here, I really want to do a backup before trying anything with it! I don't really want to brick it or put in some firmware that may improve it (or not) without a way to get back to starting point.

My info displayed on the screen
I got a Hantek MSO5202D back in Feb. 2019
SW Ver:     3.2.35(151208.0)
HW VER:      1020x55778344
Ser No:      T1G/112027xxx
LCD,Front.ts:   3.1.0

The boards in mine are:
PS PCB:            V1.00.2
Main PCB:      Serial MB V1.02 2015/3/8
daughter PCB:   DST-LA-Module_V1.00.3

From reading here I believe that mine is based no the S3C2416 SoC because 27xxx is >15000  :)

File Received from Hantek's support: dst1kb_func_mso5000d_190514.up

Instructions from Hantek:
Please unzip the file and copy the .up file to the root directory of your USB stick. The format of the USB stick is must be FAT32, and the storage space is less than 32G.
Insert the USB stick into the scope and press Utility->Firmware Update to do.

« Last Edit: October 10, 2019, 11:59:28 pm by TateRB »
 

Offline lcfvrn

  • Contributor
  • Posts: 11
  • Country: ua
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3031 on: October 14, 2019, 07:36:16 am »
 

Offline Tugo

  • Newbie
  • Posts: 1
  • Country: si
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3032 on: November 05, 2019, 09:01:28 am »
I bought DSO5072p and I wanted to do the hack.
The problem is that I cannot do a backup on this newer version. I always get a small size BIN files (around 512k-2M). Root should be over 100MB and I don't get that.
I tried backing up with Tools_P_Model and also with a command line over USB (with a help of DSO-USB-Tool). Nothing worked.

Now I have some questions:
Is there anyone who did a backup of newer DSO5072p?
Is it ok if I would use an old backup version into mine? If yes, is there anybody that has this backup so that I can download it?

Please help.
Thank you.

Best regards,
Toma┼ż
 

Offline edibg

  • Newbie
  • Posts: 1
  • Country: bg
Re: Hantek - Tekway - DSO hack - get 200MHz bw for free
« Reply #3033 on: November 19, 2019, 03:04:05 pm »
Hi there

I have MSO5202D, SW 3.2.35 ( 140312.0 ), HW version 1010X55778340, serial number T1G/012 020XXX  - I want to know is there a option to enable averaging in MATH FFT ? 
I need to use noise source as generator and FTT to check few filters but an option for averaging the results will be helpful.

Also asked hantek support for the last firmware, but for now I do not have any replay. On page previous page chsn posted a firmware for HW Version 1010x55558340 - can I use this file to update my firmware, at least it fixes the terrible cursors in FFT ?

EDIT : Hantek replayed after all, and the software is the same as the one provided from chsn.

« Last Edit: Today at 05:56:13 am by edibg »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf