Products > Test Equipment
HDD image request. Teledyne LeCroy HDO6104R
(1/4) > >>
Maximplus:
Please help me locate the disk image for the Teledyne LeCroy HDO6104r oscilloscope, which has a Seagate hybrid hard drive installed. The disk has been in use for exactly 10 years since its release date, but it is now not readable or definable.
It was a good instrument, but it died so ingloriously.
squadchannel:
I tried to find out about 6104 “R”, but all the results are in Russian.
I think “R” is a Russian exclusive model. I think the equivalent is 6104A.

It is too modern, there are not many broken ones, and there are not many resources. and it is a Russian exclusive model, and I don't know where to get the software.
To begin with, I can't find a Russian language site for Teledyne LeCroy.

Difficult to repair. |O

Contact support and ask them if they can repair it and what the procedure is.
Since it is modern, I believe they still provide support and can request a repair.
nctnico:
This is a Windows scope right? So get a new hard drive, install the OS that runs on the oscilloscope, download the software from Lecroy and install it. When I try to get the firmware for this oscilloscope, I get to download something like 'mauiinstaller.exe'. This is probably also a good time to replace the hard drive with an SSD.
DaJMasta:
As said above, standard Windows should install and then you just need the application software which is a standard package from LeCroy directly.  You may lose some of their preset settings or a splash screen, but functionality should be the same.
Maximplus:
Yes, this is a Windows-based oscilloscope, but it came with "windows embedded". I'm not sure if everything will start with windows 7 or any other. I would be very grateful if you could tell me where to download teledyne lecroy software. And whether it is in the public domain.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod