| Products > Test Equipment |
| Help, how can I calibrate AC current |
| << < (4/4) |
| daisizhou:
I have read this manual.As described in the manual, I have completed the calibration of the DC section,So I tried using a 19V small transformer with 220V AC input and 19V AC output.I use this 19V AC voltage and test it on a 19 ohm non-inductive resistor. I found that the current at this time is inconsistent with Fluke8060a,So I suspect that the communication part is malfunctioning. So I hope to test the AC current again |
| Navigation |
| Message Index |
| Previous page |